AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

DSK6416 with CCS v2.0   [2 Articles]

I have a DSK6416 (that is operated with USB) and with that I got CCS 3.1 evaluation edition. Now I think it has expired and it is not running. SO I installed CCS v2.0 (I had full s...

Problem with CCS v3.3   [2 Articles]

Hi all, i have ccs ver3.3 , when i run setup ccs , there is no C6713 DSK ( as in ccs ver3.1 to add) , only there is simulator but not DSK option . so i cant connect to my 6713D...

CCS V3.3 and V2.0 coexist on one computer   [4 Articles]

Hello, Does anybody try to install two versions of CCS on the same laptop? I was using CCS 2.0 before but now I get CCS 3.3. I am not sure whether my projects can compile and li...

CCS3.3   [3 Articles]

All, Our company is trying to move from CCS 2.21 to CCS 3.3. The attached project contains an example of code that does not compile well in CCS 3.3. The loop in the function ...

Version Problem in CCS ( CCS 3.00.21 and CCS 2.20.00)   [10 Articles]

Hi all, In CCS 3.0.021 My code is bulided and running properly,gives proper output also. In CCS 2.20.00 The same code is builded,loaded properly without giving any...

CCS v3.1- PE and DSK C6713 problems   [3 Articles]

Hello, I'm a student trying to work with Real Time Workshop and DSK C6713. Because of the Link to Code Composer Studio in the Malab2006a I must use CCS v3.1, but the Kit only br...

CCS Performance   [11 Articles]

Hi, at the moment I'm using DSK6713 with CCS 2.2 on a PIII/600MHz 128MB RAM. I have a C source file with about 2000 lines. To compile it needs about 10 Minu...

Problems in installing CCS v3.1 over CCS v3.10   [2 Articles]

Hi, I initially had a CCS v3.10beta . I am trying to install the latest CCS v3.1 over it . The message log / execution graph etc work no more . Is there some known i...

FFT in CCS

Hi, I need help to get the output in CCS using the example fftsinetable from Chassaing's book , I know that I can get the fft from CCS directly but I want to see the output...

transfer DSK6713 to a new PC

Hi, I'm getting a new PC :-) But I don't have the money to buy a new CCS. My old OS is W98 with CCS 2.20.05 running. My new one will have Win XP or Vista. Does CCS 2.20 wor...

parallel port interfacing with CCS v 3.0 DSK 6711

I m working on DSK 6711 board in which CCS interacts through paralle port I want to know which control signals are required to handshake between CCS and parallel port???? What ...

Bug in CCS (Linear Assembly)???   [2 Articles]

Hello, I am using CCS to write linear assembly *.sa files. I am finding that while executing this file, the CCS executes things in incorrect way. It does not execute AD...

DSK support with CCS 3.1   [2 Articles]

Hi all, Presently I am working with a C6416 DSK board using CCS version 2.21. I also have a evaluation copy of CCS 3.1 simulator that does not have support for the DSK board. ...

question about CCS parallel debug manager for OMAPL137   [5 Articles]

Hi, everyone: I am new to OMAPL137 ARM9 side. I have a question about the CCS v3.3 for OMAPL137 ARM9. I am using the OMAPL137 starter kit. After installed the CCS from the C...

Re: CCS v3.1- PE and DSK C6713 problems

I am in the same situation. could I download the driver form somewhere?? Hello, > > I'm a student trying to work with Real Time Workshop and DSK C6713. Because of the Link t...

CCS Log Trace Problem

Hello -- I'm runnin CCS 3.3.38.2. For some reason, today the message log (to file) has started to be out of sequence. Nothing is missing, just that blocks of lines are out...

Are there iostream classes for TI CCS

Dear all, I'm porting some code, which makes use of iostream C++ standard libray, to TI CCS. But CCS does not implement it yet. Can I get it anywhere? Thank yo...

about CCS 2.1 visual linker problem

Dear all, I am using CCS 2.1 version.I try to see amount of memory used on the SDRAM of the C6711 DSK. For CCS always i found in the file menu Visual linker always inactive...

DM6x CCS version   [2 Articles]

Hi, all! Could anyone ask me whether the same CCS version used to a C62x chip can be used to a DM6x? It's not clear from TI web site whether there are different...

CCS Problem?

C6455 DSK CCS 3.2 Hi all My project has been working and compiling well for some time now, but recently I've experienced some trouble with CCS. After about every 5 'Proje...

CCS v3.0

Hi I would like to install DM642. I have CCS v2.2 but CD-ROM of DM642 EVM use CSS v 3.0. Can I install this kit with V 2.2 of CCS or I must have v 3.0 ? if v 3.0 is necesse...

Problem in CCS   [2 Articles]

Hi, I work on 5402 dsp and face a strange problem in CCS(ver 3.1). That was a old project which never used interrupts. Both C and asm files are there. C for main\algorithm\l...

CCS 3.1 Emulator problems

Hi, I am trying to migrate to CCS 3.1 from 2.2. I have been using GEL files for unit testing my different libraries and it's been very stable with CCS 2.2, however I have pro...

CCS V3.0-A Sneak Preview   [5 Articles]

Hi All- I had a sneak preview of CCS V3.0 at the recently concluded TI Devcon. Here are my initial reactions to the same: First the business side of thin...

CCS 3.2   [4 Articles]

Dear all, I have bought some boards from sundance comp. SMT310Q : carrier board with JTAG XDS510 SMT361A : DSPC6414 D10 I installed CCS 2.2 but there was an ERROR : "c...

How to start with C64X+   [3 Articles]

Hi All My tele communication project involves using 3 Core TI processor (C6474). I am new to DSP processor and would like to learn quickly to get into the project. I have...

Using DSK with CCS 1.20 on NT

Greetings, Installation of CCS 1.20 causes uninstallation of older versions and the drivers for the DSK, very inconvienient. Has anyone had success with CCS 1.2 a...

Command Line(DOS) Interface to CCS 3.3

Is there is method to compile my CCS project through command line? I mean to say as in ccs we use build command for compiling and load for loading and run for running in simulator,...

Different profile results with load6x and CCS   [4 Articles]

Hi, I am profiling a function and am using CCS as well as load6x for this purpose. I am getting different results from both of them. 1. Load6x is showing a ...

Installing CCS 1.0

Hi all, It's nice to see many problems being discussed openly. I'm a new member. Due to some error in simulation, we had to uninstall CCS. I would b...

CCS 3.3 with C6711   [5 Articles]

Hi everybody! I'm having a little problem with the famous CCS. I was using the CCS v2.0 to run the C6711 board, but I got the latest version of the software v3.3 and tryed to...

help   [2 Articles]

Hi: Just now,I installed the CCS 1.20 on my computer which is a PC.It has 32M MEM and a P200 CPU. When I ran the CCS and want to create a new project, the CCS s...

CCS and MatLab in real-time

Hi, I am using 6711 DSK in my work, and I used both CCS and MatLab to display signals in real-time. I know that the CCS faster than MatLab in processing but I would like to kn...

GEL ??   [3 Articles]

hi, I am using CCS v2.0(eval) for 'c621x. I was running the example programs(related to dsp/bios) that comes along with ccs. In one of the programs, GEL c...

C6211 DSK with code composer 3.0.0.4

Hi All, I have C6211 dsk, and CCS 3.0.0.4 , however when I use the configuration program to configure the DSK target device I didn’t found this DSK in the templates provided by...

CCS configuration   [2 Articles]

Hi list, I have a problem with CCS setup.i work with simulation of CCS.but.i want to optimze mycodes for real-time implemention. Can i work all the time with "C...

Re: Chip Support Packages for Code Composer

mwedret, On Mon, Dec 8, 2008 at 6:18 PM, mwedret wrote: > I used the "Update Advisor" to look at the "Chip Support Packages" for > Code Composer version 3.3. There are pa...

Changing variable to const.   [4 Articles]

Hi, again. I'm posting this entry under a new thread (the previous was "Syntax differences between code in MSVC and CCS"), just in case some one should have missed it...I am g...

C++ stream in/out   [2 Articles]

Hi all, I've tried the following in CCS and it doesn't work: cout << "this is a test" << endl; I could compile and run the above in Visual C++ but ...