Adaptive Filter | ADPCM | ADSP | ADSP-2181 | Aliasing | AMR | Anti-Aliasing | ARMA | Autocorrelation | AutoCovariance | Beamforming | Bessel | Blackfin | Butterworth | C6713 | CCS | Chebyshev | CIC Filter | Circular Convolution | Code Composer Studio | Comb Filter | Compression | Convolution | Cross Correlation | DCT | Decimation | Deconvolution | Demodulation | DM642 | DSP Boards | DSP/BIOS | DTMF | Echo Cancellation | Equalization | Equalizer | ETSI | EZLITE (Ez-kit Lite) | FFT | FFTW | FIR Filter | Fixed Point | FSK | G.711 | G.723 | G.729 | Gaussian Noise | Goertzel | GPIO | Hilbert Transform | IFFT | IIR Filter | Interpolation | Invariance | JTAG | Kalman | Laplace Transform | Levinson | LPC | McBSP | MIPS | Modulation | MPEG | Multirate | Notch Filter | Nyquist | OFDM | Oversampling | Pink Noise | Pitch | PLL | Polyphase | QAM | QDMA | Quantization | Quantizer | Radar | Random Noise | Reed Solomon | Remez | Resampling | RTDX | Sampling | Sharc | TI C6711 | Undersampling | Viterbi | Wavelets | White Noise | Wiener Filter | Windowing | XDS510PP | Z Transform

RTDX with CCS and F2812 ?

Hi I'm trying to make a RTDX connection between CCS and the F2812 DSP. I use a XDS510PP+ emulator, and my version of CCS is 2.21. My questions is: Does the F2812 support RTDX ? What is required to use RTDX ? The CCS help says that: "... This step is necessary because RTDX, which is us...

Simple RtDx Question Regarding C6711DSK

Hi all, I have been using HPI to communicate between my PC application and my c6711DSK. As you know, there are problems with the API functions, and I have some reliability problems as a result. Because of this, I was thinking of using rtdx in addition to hpi, using rtdx to send commands and h...

RTDX problem

Hi all I'm running a massive test harness on a DSK6416 , I send data from Matlab via RTDX to the target and get the data back for analyzing in Matlab via RTDX. After a while CCs crashes and caused RTDX input channel failure in Matlab . Error message in CCS is as following "Unexpected F...

An old basic question about RTDX without CCS

I knew that whether RTDX without CCS still works is a very old question, and I also knew the answer is NO. My problem is that I don't care whether CCS is running, but I don't want to open my project files. Is the RTDX still working? It sounds funny, but I think "without CCS" is different fro...

RTDX

Hello, I would like to tranfer a picture from PC to DSP (TMS320 6711) to treat ot. Is it the best way to use RTDX ? thanks, Nicolas ...

Urgent:RTDX issue

Hi all I'm running a massive test harness on DSK6416, I'll send the input data from Matlab via RTDX to the target and I get back the data for analyzing in Matlab via RTDX. After a while , matlab reported a failure in input channel , at the same time the CCS has crashed and error in CCS is a...

Can I use STS module of DSP/BIOS while disabling RTA & RTDX at the same time?

Hi, all, TI C6x platform. Could I create STS objects and use them to monitor system run-time information while at the same time disabling RTA and RTDX in the DSP/BIOS configuration tool? I don't want the RTA and RTDX modules to use up too much memory and CPU cycles. Thanks! Rose ...

Getting data into MATLAB through RTDX

Hi everyone, I am looking for a way to get data off a dsp board into MATLAB using RTDX. I am using an older version(6.1) and do not have the Code Composer toolbox(CCS link for IDE or something like that) installed. Is this still possible? If so how? Thank you very much for your time. Ro...

RTDX by using ezdspF2812

hi everybody, How could we use RTDX for the ezdspf2812 ? is there any sample program for this problem ? thanks for your help and best regards ...

Re: Daughterboard AED-103

"Claudio" wrote in message news:1138129666.901639.252850@g44g2000cwa.googlegroups.com... > Hi everybody, > > Has anybody already used the AED-103 daughterboard from Signalware? > > I have a TMS320C6713 DSK board from Spectrum Digital with the > daughterboard AED-103 from Signalware...

Simple RTDX host application with C/C++

Hello everyone, I want to do a simple console application to send and recieve data from the DSP. I've found information in the CodeComposer Online Help... but the examples are with Visual Basic and I still have some questions. If i want to use C/C++ to develop a host RTDX application: ...

Re: No live Message Log in CCS for C6xxx

"Wolfgang" wrote in message news:c8smmi$qrh$01$1@news.t-online.com... > Hello, > > I don't get a "live" feedback from CCS using > LOG_printf(&trace, "Hello world."); > Only if the program is stopped the message log is updated. > When it's counter reaches 63 it's stopped. > Also t...

help me on RTDX JTAG

Hi I am doing control system project using Ti DSP I have a TMS320C6711 board with CCS DSK C6000 1.23 I have to transmit and process large amount of data on real time. Can you tell me? Which JTAG is essential Where can I get more help on RTDX for coding (target and client). I am waitin...

'spectrum digital' vs 'TI DSK'

Hi dear all, I am planning to buy a DSK (6416) but I hesitate btwn spectrum digital and TI ones. I appreciate the extention prototyping board of SD but I wonder if I can get the same softwares package than with TI (real time OS, cache analyser, event profiler, RTDX.....). Could you tell me ...

DM6437 EVM and RTDX

Hello, I do have a TMS320DM6437 Evaluation Module¹ and tried to get RTDX to work. Therefore I have to define the .rtdx_data and the .rtdx_text sections. I tried it this way: ################################################################### MEMORY { L2RAM: o = 0x10800000 l = 0x...

RTDX Interupt Problem (Probably)

Hi, I'm doing a student project and I have made a simple graphic equalizer using a c6711 DSK. I am trying to write a host application to put a pretty user interface on the equalizer using RTDX (JTAG, not HSRTDX) to send the positions of several sliders to the DSK. I have successfully written t...

Question about PC Host and DSK Communication with 6416 DSK

Hi, everyone. I need some help from you, guys. I have 6416 DSK of SpectrumDigital co., which is connected to my PC (Window XP based) with USB connect (not JTAG XDS510 USB). The 6416 DSK itself supports USB connection. I also have Code Composer Studio v2.2 and MS Visual C++ v6. The prgogram...

TI DSP - A newbie problem - reading an integer

Code Composer Hangs while reading data from Host. The CCS stops responding on RTDX_read() function call. I'm using CCS Version 2.0 (target DSP is 5402) I've also read RTDX Troubleshooting Guide in Help and impemented a periodic function that calls RTDX_Poll() but the same problem.... How do I ...

Re: problem using simulator in CCS 3.0

Do you get runtime error? What is the error? Are you using CDB file? Disable the RTDX support. ...

Re: Starting With DSP/BIOS : lost

"Gwen" wrote in message news: ... > Hello, > > I am starting with a C54CST, I get the corresponding evalutation board > C54CST EVM wihtout JTAG. I have some example given by SPIRIT the company > which produced the algorithms included inside the DSP. > > I manage to use the flex e...

Re: TI DSP 5510 versus 5416

"trellis coder" wrote in message news:IkCSc.22151$Jp6.11635@newsread3.news.atl.earthlink.net... > When using two DSK kits from Spectrum Digital one with 5510 DSP and another > with 5416 DSP but otherwise more or less similar in config, i am seeing the > following: > > 1> Both DSPs...

TMS 67xx clarification

hi guys, i am currently working with TMS 6711 processor..in the kit that is available, we have a plug in for audio, but no separate exclusive plug for video..what is the procedure that i should follow for sending video signals? secondly, what is meant by RTDX?where is it used? regards ...

Re: Control of a TI C6xxx DSK

> You don't say which DSK it is. If it is the '6713, there is an I2C port > available that is presented on the HPI header. The board is '6416. I was able to borrow a book [1] that has cleared it up nicely. The magic words are RTDX and OLE. I should probably be able to code up a simple GUI us...

Overload printf function on C28 and DSP/BIOS

Hi, i'm working on C2812 TEXAS DSP. I'd like to redefine a printf function to send strings to serial port instead of RTDX way. Have an idea ? I'd tried to redefined putchar or putc function, but it seems more complex. thx. ...

COM functions questions

Hello, I am using the MATLAB 'actxserver' function to establish a connection to RTDX(for real-time data exchance between MATLAB and a DSP board) and if say 'h' is my activex object, I use invoke(h) to get a list of functions I can use in that interface. There are some functions that have "point...

BIOS 5.31 and HST module

Hello, I read in the latest version of BIOS API manual (SPRU403m) that the HST module will not be supported in future releases. This seemed like a convenient way to communicate with a host processor. Are there other means (within the BIOS framework) of communicating with the host? My unders...

Recovering data (TMS320DM642)

Hi, Soon i will implement a video compression algorithm on DM642. I'd like to recover the compressed data, which will be stored in SDRAM, in order to be able to replay the video on the PC. Can you tell me if Code Composer allows us to recover data stored in external memory and to save them ...

Re: Online Communication through parallel interface on eZdspf2812

In case what you are after is to have CCS communicate with your application, look into RTDX and the tutorials provided in CCS. It is possible, through the use of probe points and the JTAG interface to have a PC application interact with your DSP application during development. If these two r...

Re: Building/Running C64x from commandline

nitesh.bhandari@gmail.com wrote: > Does someone knows how to do this? or if it is impossible to do so? It is for sure possible to compile and build TMS6200C64xx executables. I use the stand alone compiler and linker (on Linux with wine), see the following example: # compile source files...

Host application without CCS in DSK6416

Hi all I have a DSK 6416 , before I asked for a way to load a COFF file to the DSK 6416 without CCS but I didn't get much help, basically I was asking to see if there is a HPI library provided with DSK6416 as it is with some other DSKs. I will be gratefull if anybody is aware of any library...

Re: want to display data on LCD MONITOR

On Mar 13, 4:51 pm, "usman860" wrote: > HI, > > I am using TMS320C6711 dsk for my final year project. I want to > display data on a LCD monitor (its very necessary). Is there any daughter > card available that can solve this problem? > I badly need help on this. > I thought o...

Re: DSP/BIOS Float[] Vs float[]

On 26 Jan 2004 09:53:57 -0800, rockall_rebel@yahoo.com (Fran MacCarthy) wrote: Other people have answered (at least partly) your other questions, although I would repeat that there are some fundamental flaws there! > I plan to write a PC application which allows the user to specify the > fr...

Re: DSp/BIOs in CCS

jayadevan wrote: > Hi all... > > I am jayadevan,a student from india.As part of my course curriculum i am > doing a project on image processing implemented using DSP/BIOS. > > i have to read an image file in the raw file format. > but i dont know how to read a file in dsp/bios. > ...

Re: file operations

Thaya wrote: > Hi all, > > I am using DSK6416 board and CCStudio3.0 to do a project. I am using > the AIC23Codec LineIn to get the input and I store the sampled data > into a int array. For my later analysis of gathered input data, I > wanted to write those data into a text file. I have ...

[CCS] HSC - unable to bind

Hello, I am using CCS 3.3 and try to use Host Channels (for input, dataflow is Host-> Target). Therefore I created in the BIOS a new HST. Mode is input, bufseq is DDR2, bufalign is 4, framesize (words) is 1 and numframes is 1. The HST uses RTDX, which is enabled. The I try to bind the HS...

RTDX -- TI C2000

I'm facing following problem when incremental build my controller: Error using ==> rtw_checkdir.p> rtw_checkdir at 47 Your current working directory is: C:\Program Files\MATLAB\R2007a\toolbox\simulink\simulink\messages The Real-Time Workshop does not permit you to build programs in the ...

Re: Transferring and receiving data with C6711 DSK

On Sun, 26 Oct 2003 09:46:51 +0100, Jacek Raczko wrote: > I just > recently tried to look into that "audio" example - all it does is that it > copies input to output - nothing else... but the construction of it is so > nasty!!! I don't advice anybody to even look at it! especially beginner...

DSP/BIOS : IDL Thread : CPU Usage

Hello, I writing an application using the full TI kit : Code composer studio, DSP/BIOS,... and i need to know the CPU usage. The TI's DSP/BIOS include an IDL thread which can be used to see CPU usage using RTDX (jtag, debugger...). But the application i made run on a proprety acquisition bo...

Re: TI CCS question

> I've noticed the CCS takes up close to 100% of CPU time when the DSP is > running. Is this because of the CCS/CPU emulating the DSP? I disabled RTDX and turnded off "Real Time Analysys" and "All Trace Event Classes" in my CDB file Global Settings section. That helps a lot on my PC, but so...

Re: C6711 dsk question

Sorry folks, I have to withdraw this question. From TI tutorial, the answer my question seems to lie within the understanding of the usage of RTDX. I am working on it. Regards, FD "flipdog" wrote in message news:Wfm1c.68260$aH3.2089575@bgtnsc04-news.ops.worldnet.att.net... > Hello al...