Hi there. I have been set a homework question for my university module in
DSP, and it is driving me mad! I don't have a great understanding of DSP at
the moment and was looking for some guidance.
...
http://asp.eurasipjournals.com/about/apcfaq/why
Open access publishing is not without costs. SpringerOpen defrays
these costs through article-processing charges because it does not
have subscript...
Hi Guys
I have the following problem.
I am trying to reconstruct the magnitude/phase of an unknown
continuous-time (S-domain) minimum-phase system based on samples of
the phase. The problem is...
I unearthed recently an old Spartan 3ADSP1800 board that I bought and
immediate forgot about some 3 years ago. It seems to me to be ideally setup
for HF ham band reception only SDR. It has an LTC ...
(1) Can someone please let me know which clock determines the symbol rate
at the transmitter? For example, in linear modulations we say \sum
a(k).p(t-kT), so which physical clock determines this T? Is...
Hi all:
Assuming x(t) is a BPSK modulated signal centered at f0, I split it into
two parts, one is multiplied with cos(2*pi*fc*t), pass through LPF and A/D,
that became digitized In-phase, I(n). An...
I'm thinking about the following:
We know that BPSK has a mutual-information capacity around 0 dB
(some say, 0.2 dB by a different argument, but it's close), and
that this is ... most would calcu...
If someone is well versed in the Chirp Z transform, could you help me out a
little.
Im a little confused about the freq. resolution one can attain using the
CZT on a contour on the unit circle....
Hi,
I would like to select a Floating Point DSP. I was looking-up the
Microchip website and I see things like:
"Support for Floating Point" and
"Floating Point Library"
I get a feel...
Hi,
I am working on a QPSK receiver (20 Mbps) for short packet reception and
based on a preamble. In a first step I use a CW preamble for timing and
coarse frequency acquisition, and with a differ...