Comp.dsp is a worldwide Usenet news group that is used to discuss various aspects of digital signal processing.
There are 16908 threads in our archives.
You are looking at page 61 of 1691.
The threads with the newest articles are listed first.
Haohe - 2012-02-23 10:35:00
Hello, I am convolving a vector, lets say A with a random vector say B1,
B1=randn(1000,1) in Matlab: conv(A,B1).
Then, I re-run it with B2=randn(1000,1)and conv(A,B2) but unfortunately the
hyun.ha - 2012-02-23 01:51:00
Here I have a problem to re-produce same results with MATLAB and FFTW
during 2 dimensional FFT.
I'm trying to do FFT with Gaussian convolution which coordinates varies
I just saw an interview with John Glenn, one of the space pioneers, on
PBS. He was the first American to orbit Earth and reenter (and later a
US Senator.) It awakened a memory probably worth shari...
pgdragone - 2012-02-22 16:11:00
To demodulate QPSK requires a carrier recovery circuit.Without a recovered
and properly phased carrier it is not possible to demodulate the I and Q
In the analog world there are circuits ...
nutnut - 2012-02-22 10:36:00
I am designing an FSK coherent demodulator. I have some trouble on timing
recovery. The question is:
-If I use a timing error detector that works with N samples/symbol (e.g.
Fender123 - 2012-02-22 03:55:00
Reading up a 1988 edition of Lee & Messerschmitt's "Digital Communication",
I came across this gem (Ch18 pg 643):
"In principle, echo cancellation could be used to share any medium, such as
ali [2 articles]
Umair Ahmed - 2012-02-21 20:21:00
In a game of "can you top this".....
I worked at a small factory where they made condenser capacitors for
cars. Worst job of my life. I welded a bracket to the can thousands
of times/day. The ...
- 2012-02-21 18:10:00
Marc2050 - 2012-02-21 14:59:00
I am expecting to get a frequency response at 19.3 Hz from a signal
For reason that I wont go into details here, I've a resolution of FFT at
0.25 Hz. So, if I were to correctly get the...
Mac Decman - 2012-02-21 00:57:00
This is going to be kind of an odd post. I am trying to replace my
measurement system. Currently I produce a gliding tone exponential
sweep with an IF following:
Fstart + Fstart*(exp( (n./N)*log(...