Bandlimited Interpolation

The material of this section was adapted from the updated online version of [470].

Bandlimited interpolation of discrete-time signals is a basic tool having extensive application in digital signal processing. In general, the problem is to correctly compute signal values at arbitrary continuous times from a set of discrete-time samples of the signal amplitude. In other words, we must be able to interpolate the signal between samples. Since the original signal is always assumed to be bandlimited to half the sampling rate, (otherwise aliasing distortion would occur upon sampling), Shannon's sampling theorem tells us the signal can be exactly and uniquely reconstructed for all time from its samples by bandlimited interpolation.

Considerable research has been devoted to the problem of interpolating discrete points. A comprehensive survey of ``fractional delay filter design'' is provided in [272]. A comparison between classical (e.g., Lagrange) and bandlimited interpolation is given in [413]. The book Multirate Digital Signal Processing [97] provides a comprehensive summary and review of classical signal processing techniques for sampling-rate conversion. In these techniques, the signal is first interpolated by an integer factor and then decimated by an integer factor . This provides sampling-rate conversion by any rational factor . The conversion requires a digital lowpass filter whose cutoff frequency depends on . While sufficiently general, this formulation is less convenient when it is desired to resample the signal at arbitrary times or change the sampling-rate conversion factor smoothly over time.

In this appendix, a public-domain resampling algorithm is also described which will evaluate a signal at any time specifiable by a fixed-point number. In addition, one lowpass filter is used regardless of the sampling-rate conversion factor. The algorithm effectively implements the ``analog interpretation'' of rate conversion, as discussed in [