On Wed, 4 Mar 2009, Willer Justinvil wrote: > Mike, > ? > I have an older TI DSP chip (TMS320C6711) and I trying to load some > files...

On Wed, 4 Mar 2009, Willer Justinvil wrote: > Mike, > ? > I have an older TI DSP chip (TMS320C6711) and I trying to load some > files into its memory using Code Composer Studio v3.3, but the v3.3 does > not support this device. I am looking for an older version of code > composer studio maybe v2.0 or v2.20 and up. TI would not allow me to have > the older version. Maybe you or some in the

Hi all, We recently started to work with the Ez-kit 21369 evaluation board from ADI. Compiling, Flashing and running algorithms works like a...

Hi all, We recently started to work with the Ez-kit 21369 evaluation board from ADI. Compiling, Flashing and running algorithms works like a charme. BUT we suddenly destroyed 2 boards. And thus bought an antistatic mat with antistatic wrist band. Despite of lots of precaution playing with the board we still destroyed 3 of them after while... It seems that the processor still r...

I have a question relating to demodulating QPSK. QPSK can not be demodulated unless the exact freq and phase of the unmodulated carrier is...

I have a question relating to demodulating QPSK. QPSK can not be demodulated unless the exact freq and phase of the unmodulated carrier is known. Therefore, the classic way of demodulating QPSK is to Recover the Carrier. This can be done with a Costas Loop or a Squaring circuit---both of which require the presence of the "carrier" in each of the bits being received. (Yes--I'm aware that...

Hi! Any body tried the FFT routines given in visualDSP compiler manual..... we are trying to use the Library routines rfft_fr16 but we are...

Hi! Any body tried the FFT routines given in visualDSP compiler manual..... we are trying to use the Library routines rfft_fr16 but we are unable to get proper reslts......... we have checked Compiler documentation, this is just an example code we need to test........... the thing is outFFT is always showing "zero" in the following program we are using visualDSP 5.0 #define EE_LENGTH ...

Hi all I dont have experience working with aDSP21060. I have CAN Controller mapped in external memory 0x400000, this controller has internal...

Hi all I dont have experience working with aDSP21060. I have CAN Controller mapped in external memory 0x400000, this controller has internal register from 00 to 0xff. How can i do to read and write this register? Thanks you in advance Marcelo

Hi Everybody, I have an ADSP-21364 EZKIT LITE, And I want to make an Amplitude (volume) meter application. So low volume signal no led...

Hi Everybody, I have an ADSP-21364 EZKIT LITE, And I want to make an Amplitude (volume) meter application. So low volume signal no led lightning, hiw volume signal all leds lightning. I want to build it on Talkthru Analog IN-OUT example. I start to modify SPORTisr.asm, but it doesn't work and I cant move on. Can someone help me please? Here is modified SPORTisr from Analog In-Out(as...

hi everyone, i am beginner to using blackfin. I am having ezlite kit bf53. we want to perform fir filtering of sinewave plus noise....

hi everyone, i am beginner to using blackfin. I am having ezlite kit bf53. we want to perform fir filtering of sinewave plus noise. how do i give the input to the blacfin as a sine wave?how do i make the code for fir run in bf535 and see the result on plot window? somebody please help thanking you, bharani.

hi friends i have a basic doubt in plotting freq response. i have written a fft computation program (64 point)on BF533 using Visual DSP++ 5...

hi friends i have a basic doubt in plotting freq response. i have written a fft computation program (64 point)on BF533 using Visual DSP++ 5 software. am not able to plot this freq response. In the sense if my input data is a 1K sine wave which is sampled at 100K my freq response should give me a spike like at frequencies 1K,101K etc.The same can be seen using MATLAB software But in visualD...

Hello! We're using SPORT in multichannel autobuffer mode, SCLK and TFS/RFS are generated externally. After some special signal becomes high...

Hello! We're using SPORT in multichannel autobuffer mode, SCLK and TFS/RFS are generated externally. After some special signal becomes high (let's call it RESET) SCLK/TFS/RFS are masked and SPORT should be disabled by DSP. When RESET becomes low SPORT needs to be reenabled. But after reenabling SPORT we have some corrupted data at DT. And (as we suppose) because RESET is async with DSP ...

Hi all, Can body ho to generate sine compared PWM in F2407.. thanks in Advance Regards Priya

Hi all, Can body ho to generate sine compared PWM in F2407.. thanks in Advance Regards Priya