Sign in
Search adsp
Subscribe to adsp
adsp by Keywords
AD1819 | AD7332 | ADSP-2106 | ADSP-21060 | ADSP-21065L | ADSP-2116 | ADSP-21160M | ADSP-2181 | ADSP-218x | ADSP-219 | ADSP-2199 | ADSP219 | BF531 | BF532 | BF533 | BF535 | Blackfin | FFT | JTAG | LDF | SDRAM | SHARC | SPORT | UART | VDSP++ | VisualDSP
Discussion Groups
Discussion Groups | Analog Devices DSPs | UART initialization in ADSP-21061
Technical discussions related to Analog Devices DSPs (including Blackfin, TigerSHARC, SHARC and ADSP-21xx DSPs).
UART initialization in ADSP-21061 - amol gavande - Sep 30 7:42:00 2002
|
hi, i am writing a simple program in which i am initializing UART registers and one isr routine in which i am doing loopback. but the problem is that the processor is not generating the IRQ2 interrupt which is the UART interrupt. so it is not going in the isr routine. i am writing this program in C. plz solve my problem. |
|
|
(You need to be a member of adsp -- send a blank email to adsp-subscribe@yahoogroups.com )
Re: UART initialization in ADSP-21061 - Kenneth Porter - Sep 30 21:26:00 2002
|
On Mon, 2002-09-30 at 00:42, amol gavande wrote: > hi, > i am writing a simple program in which i am > initializing UART registers and one isr routine in > which i am doing loopback. but the problem is that the > processor is not generating the IRQ2 interrupt which > is the UART interrupt. so it is not going in the isr > routine. i am writing this program in C. > plz solve my problem. Put an oscope on the IRQ2 signal and see if the UART is generating it. That should tell you if the problem is in the UART or in the SHARC. I've never used one of these kits so I can't help beyond that. [Please direct replies to the list.] |
(You need to be a member of adsp -- send a blank email to adsp-subscribe@yahoogroups.com )