Booting (LINK) | Analog Devices DSPs

Technical discussions related to Analog Devices DSPs (including Blackfin, TigerSHARC, SHARC and ADSP-21xx DSPs).

HI ALL !!!! Thanks in advance, I have a probelm as stated below. There are 2 SHARC 21062 Processors on the board, both in the Master mode.Sharc 1 is booted through Eprom. After the Sharc 1 is booted, Sharc 1 has to read boot code for sharc 2 from some sector on the Eprom and boot the Sharc 2 through Link Port. One method will be to DMA the whole Boot code for Sharc 2 in to internal memory of Sharc 1 and then do a Link port DMA on Channel 6 to the Sharc 2. This process wastes the Internal memory of Sharc 1. As EPB0 regester and LBUF 4 are alised, is it possible to do a External port DMA over channel 6 from Eprom 6 times to the EPB0 regester of Sharc 1 by Sharc 1 and then enable the Link BUFF 4 in transmit mode of 48 bit instruction?. Please suggest any other solution for the problem. Thanks Regards C.R.Patil

(You need to be a member of adsp -- send a blank email to adsp-subscribe@yahoogroups.com )

Sign in

Search adsp

Subscribe to adsp

adsp by Keywords

Discussion Groups

Discussion Groups | Analog Devices DSPs | Booting (LINK)

Booting (LINK) - C R Patil - Jun 16 11:35:00 2000