AD1819 | AD7332 | ADSP-2106 | ADSP-21060 | ADSP-21065L | ADSP-2116 | ADSP-21160M | ADSP-2181 | ADSP-218x | ADSP-219 | ADSP-2199 | ADSP219 | BF531 | BF532 | BF533 | BF535 | Blackfin | FFT | JTAG | LDF | SDRAM | SHARC | SPORT | UART | VDSP++ | VisualDSP

Hello to all, we built our application using VDSP 4.10 and the White Mountain emulator. Now we want to start our application directly from Boot- Eeprom but we're not sure how to tranfer the hex-file there with our emulator tool. Can anybody give us some informations please ? Thank you. Klaus

______________________________
Start your Android Ice Cream Sandwich development on TI's AM35x Sitara ARM Cortex-A8 processor today.



(You need to be a member of adsp -- send a blank email to adsp-subscribe@yahoogroups.com )

You need an Eprom programmer to program your eprom with the hex file that you generate using visualdsp. Hopefully you have your eprom in some kind of socket so that you can remove the chip, program it and put it back in. If it's a flash chip, then you can write a program to write your binary data to the flash using the DSP. I'm not sure if there are example programs for this packaged in VDSP. If it's a flash chip you might be able to just use the 'fill' command to fill your flash with your boot code (the hardware folks will probably know more about how feasible this is) Cheers Bhaskar --- In adsp@y..., k.dresel@o... wrote: > Hello to all, > > we built our application using VDSP 4.10 and the White Mountain > emulator. Now we want to start our application directly from Boot- > Eeprom but we're not sure how to tranfer the hex-file there with our > emulator tool. > Can anybody give us some informations please ? Thank you. > > Klaus

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of adsp -- send a blank email to adsp-subscribe@yahoogroups.com )