Sign in

username:

password:



Not a member?

Search c54x



Search tips

Subscribe to c54x



c54x by Keywords

5409 | 5416 | AD5 | ADC | BIOS | Boot | Booting | Bootloader | C540 | C5402 | C5409 | C5416 | CCS | Codec | DMA | Dmad | DSK | DSKPlus | Dsplib | EVM | FFT | FIR | Flash | GPIO | HPI | Initialization | Interrupt | JTAG | LOG_printf | MCBSP | RFFT | RTDX | Sampling | STLM | UART | VC540

Sponsor

NEW! TMS320C6474: 3x the performance. 1/3 the cost. Three 1 GHz cores on 1 chip.

Discussion Groups

Discussion Groups | TMS320C54x | turn off the DC filtering of the codec of DSK5402

Technical discussions about the TI C54x DSPs (including the c5401, c5402, c5402a, c5404, c5407, c5409, c5409a, c5410, c5410a, c5416, c5420, c5421, c5441, c549, c5470 and c5471).

  

Post a new Thread

turn off the DC filtering of the codec of DSK5402 - cheto2001es - Oct 10 21:51:00 2002



Hi Everybody! i have a trouble: i am trying to use the audio codec of
the board, but it has an analog stage before the codec (50ad) that
eliminates DC (i see on the schematic "5402_DSK_schem.pdf"). If i
need this DC, it would work if i short-circuit the capacitors.
This also is present in the other sense (output). if i want to send
out a signal with DC component, may i short-circuit the caps too?

Thanks a lot





(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )

Re: turn off the DC filtering of the codec of DSK5402 - Jeff Brower - Oct 11 14:14:00 2002

Cheto-

> Hi Everybody! i have a trouble: i am trying to use the audio codec of
> the board, but it has an analog stage before the codec (50ad) that
> eliminates DC (i see on the schematic "5402_DSK_schem.pdf"). If i
> need this DC, it would work if i short-circuit the capacitors.
> This also is present in the other sense (output). if i want to send
> out a signal with DC component, may i short-circuit the caps too?

I think it will work; except I think there is more than one cap on both input
and
output sides that you need to deal with. I believe that one of our engineers
had to
do a similar thing last year for a customer. Please let me know if it works for
you.

Jeff Brower
DSP sw/hw engineer
Signalogic





(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )