5409 | 5416 | AD5 | ADC | BIOS | Boot | Booting | Bootloader | C540 | C5402 | C5409 | C5416 | CCS | Codec | DMA | Dmad | DSK | DSKPlus | Dsplib | EVM | FFT | FIR | Flash | GPIO | HPI | Initialization | Interrupt | JTAG | LOG_printf | MCBSP | RFFT | RTDX | Sampling | STLM | UART | VC540

dear 
  is there any defferent between tms320c5416 and tms320c5416
  amd where should i start learning to start working and programming this ic through CCS
  thanks in advance

---------------------------------
8:00? 8:25? 8:40?  Find a flick in no time
 with theYahoo! Search movie showtime shortcut.

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )

Mohammad Hashemi Nejad-

>   is there any defferent between tms320c5416 and tms320c5416
>   amd where should i start learning to start working and programming this ic through CCS
>   thanks in advance

Why did you choose C5416?  Do you have a 5416 DSK or EVM card?

You should have a strong reason.  Otherwise, if you're just starting to get into DSP, you
should use a newer device,
such as C55xx or C64xx.

-Jeff

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )

Mohammad Hashemi Nejad-

>   i want to use this ic in my university project becuase its specification (160 mips and
ram capacity is match to my
> desired function)  i have no  DSK or EVM card every thing should be on my board

So you will design your own board?  In that case I would suggest that you download the
schematic for the appropriate
DSK card and follow that.

>    then sorry about a mistake in my previouse mail i meant deference between tms320VC5416
and tms320C5416
> one has "VC" the other has "C" in between

'VC' designates mixed voltage devices, typically with 3.3V I/O and a separate Vcc core.  'C' is
the old designator for
5V parts.

>   why do you suggest to use C55xx or C64xx

They are newer devices.  You would find more peer support in online forums if you're using
newer devices.

-Jeff

> Jeff Brower <j...@signalogic.com> wrote:
>   Mohammad Hashemi Nejad-
>
>> is there any defferent between tms320c5416 and tms320c5416
>> amd where should i start learning to start working and programming this ic through
CCS
>> thanks in advance
>
> Why did you choose C5416? Do you have a 5416 DSK or EVM card?
>
> You should have a strong reason. Otherwise, if you're just starting to get into DSP, you
should use a newer device,
> such as C55xx or C64xx.
>
> -Jeff
> ---------------------------------
> Don't be flakey. Get Yahoo! Mail for Mobile and
> always stay connected to friends.

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )