Sign in
Search c54x
Subscribe to c54x
c54x by Keywords
5409 | 5416 | AD5 | ADC | BIOS | Boot | Booting | Bootloader | C540 | C5402 | C5409 | C5416 | CCS | Codec | DMA | Dmad | DSK | DSKPlus | Dsplib | EVM | FFT | FIR | Flash | GPIO | HPI | Initialization | Interrupt | JTAG | LOG_printf | MCBSP | RFFT | RTDX | Sampling | STLM | UART | VC540
Ads
Discussion Groups
Discussion Groups | TMS320C54x | Can my old XDS510 work properly with the CCS?
Technical discussions about the TI C54x DSPs (including the c5401, c5402, c5402a, c5404, c5407, c5409, c5409a, c5410, c5410a, c5416, c5420, c5421, c5441, c549, c5470 and c5471).
Can my old XDS510 work properly with the CCS? - Jane Shen - Apr 9 21:02:00 2001
|
Hi all, I had an old version XDS510, which came with the C5X emulator (3 years ago). Now I bought a CCS 1.20. I noticed that in the CCS setup, I could add a XDS510 emulator board to work with the CCS. Can my old XDS510 work properly with the new CCS? I connect the XDS510 through a JTAG cable to the 5402DSK JTAG pod, config the CCS to run with XDS510 emulator board, put the pin1 of DIP switch on 5402DSK as "UP", run the CCS and got an error message as: can't initialize target DSP I/O port =0x0240. Am I on the wrong direction trying to make the old XDS510 work? Can anyboady give me a light on this? Thanks in advance. Jane SHEN Tri-Link Technologies Inc. #301-8988, Fraserton Court Burnaby, BC V5J 5H8 Tel: (604) 451-9113 Fax: (604) 451-9118 Email: |
(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )