AIC23 | C5509 | CCS | CSL | EMIF | EVM | GEL | GPIO | HPI | Interfacing | JTAG | McBSP | OMAP | Omap15 | OMAP59 | RTDX | SDRAM | TMS320VC5509 | USB | XDS5

Hi every one,
I used the dma4 project from examples\evm5510 folder for 5510 simulator. it
built and compiled properly but it could not transfer xmt buffer to rcv buffer
by dma. and the interrupt service routin of  dma is not run. I also tested the
dma3 project but it does not work too. could you help me how cn I solve this
problem?
Regards

______________________________
Start your Android Ice Cream Sandwich development on TI's AM35x Sitara ARM Cortex-A8 processor today.



(You need to be a member of c55x -- send a blank email to c55x-subscribe@yahoogroups.com )

As my experience the 5510 simulator has problem about Mcbsp (internal clk
generator). WhenI checked the same project on 5510 DSK they worked properly. so
do not trust on 5510 simulator sbout McBSP.
good luck

Hi every one,
>I used the dma4 project from examples\evm5510 folder for 5510 simulator. it
built and compiled properly but it could not transfer xmt buffer to rcv buffer
by dma. and the interrupt service routin of  dma is not run. I also tested the
dma3 project but it does not work too. could you help me how cn I solve this
problem?
>Regards
>

(You need to be a member of c55x -- send a blank email to c55x-subscribe@yahoogroups.com )