--- On Wed, 27/4/11, ahmed wrote: From: ahmed Subject: Re: [c6x] VLAN Tagged packets not forwarded by DM648 To: "Richard Williams" ...

--- On Wed, 27/4/11, ahmed wrote: From: ahmed Subject: Re: [c6x] VLAN Tagged packets not forwarded by DM648 To: "Richard Williams" Date: Wednesday, 27 April, 2011, 10:48 AM Richard,                The issue has been resolved, changing the VLAN ENCAP bit in CPSW switch and changing the maximum trasmit unit size has re

Hello everybody, I'm new to the group and to the whole field of DSPs, so I hope you'll be patient enough to read through my posts, correct any...

Hello everybody, I'm new to the group and to the whole field of DSPs, so I hope you'll be patient enough to read through my posts, correct any error and/or inaccuracy, and hopefully provide some answers that can help me advance in the understanding of this field of application. Let's get to the point: I have to connect an A/D converter (AD9461) to a TMS320C6455 DSK board. The A/D converter ...

Hello all, I am working on "hello world application of ndk 2.0 on DM648". This board(DM648) has two ethernet ports on it. This...

Hello all, I am working on "hello world application of ndk 2.0 on DM648". This board(DM648) has two ethernet ports on it. This application (hello world)has a feature that it takes data from its one port and passes it to the other one (like a switch).The problem is VLAN Tagged packets are not forwarded by the code even though i have enabled the Rx_VLAN field . I need ur valuable suggest...

Dear Sir, I would like to stop being in this group as I already finished my work. Thanks.

Dear Sir, I would like to stop being in this group as I already finished my work. Thanks.

Hi, I am working with C6713 DSK and ADS7881 converter. I am trying to make a FFT analyzer. My project is working fine at the moment but it is...

Hi, I am working with C6713 DSK and ADS7881 converter. I am trying to make a FFT analyzer. My project is working fine at the moment but it is lacking with real time implementation. Now I want to use PING PONG buffer scheme to make it real time FFT analyzer. My idea is to capture samples in PING buffer and by the time PONG buffer is filled with new sample compute FFT of data stored in PI...

Hello, We have a Linux driver talking to TMS320C6412 board. We are able to read the EEPROM content but not able to write it. If we use CSL...

Hello, We have a Linux driver talking to TMS320C6412 board. We are able to read the EEPROM content but not able to write it. If we use CSL based PCI_EEPROMWrite/Read from DSP firmware then we are able to read and write. So my question is can someone please tell me the eeprom write sequence and can someone please provide the sample eeprom write sequence code. Thanks -Yatin __________...

Hey guys. Apologies if I'm posting this twice but I'm not sure if it went through the first time. Basically, I'm taking a 440Hz sine wave...

Hey guys. Apologies if I'm posting this twice but I'm not sure if it went through the first time. Basically, I'm taking a 440Hz sine wave in from the board, storing it in a buffer and outputting it. When I view the FFT of the data stored in the buffer it shows a 440Hz sine wave as expected. Now, for some reason, when I do some operations my outputted signal is affected. For instance, if I c...

hi guys. I have a pb. I tried the DM648 ethernet demo,but it seems there is sth wrong...

hi guys. I have a pb. I tried the DM648 ethernet demo,but it seems there is sth wrong . C:\dvsdk_1_11_00_00_DM648\ndk_1_92_00_22_eval\packages\ti\ndk\example\network\cfgdemo\evmdm648 When i compiled the project,downloaded the out file ,and run the cpu.It prints a lot. TCP/IP Stack Client Configuration Demo 220 bytes required for save Using MAC Address: 3c-2d-b7-27-b7-c6 cpsw_MDIO...

Hello, I am looking for TI DSPs, OMAP?, and MCU with integrated High Speed USB. If you know one, could you please let me know. Thanks,-Yatin...

Hello, I am looking for TI DSPs, OMAP?, and MCU with integrated High Speed USB. If you know one, could you please let me know. Thanks,-Yatin

Hello, I am a final year student in the UK trying to get the TMS320C6713 DSP to interface with a touchscreen via a UART connection. I am using the...

Hello, I am a final year student in the UK trying to get the TMS320C6713 DSP to interface with a touchscreen via a UART connection. I am using the DSK from Spectrum Digital and CCS 3.1. I am using SPRA633C document to get the serial port on the DSK to act like a UART. I have connected pin 36, 42 and 44 and DX1, DR1 and GND respectively on the J3 serial port. These pins connect to a MAX232 chip whi...