AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Hi there,

can somebody help me? I have some problem in McBSP (Multichannel Buffered Serial
Port).
I tested digital loopback using source code in
C:\CCStudio_v3.1\examples\dsk6713\csl\mcbsp\mcbsp1\main_mcbsp1.c
I set MCBSP_SPCR_DLB_OFF so it should be manual loopback, then the result is :
- in mcbsp a ( J15 5-6k interface) / MCBSP_DEV0 :
    it returns TEST FAILED (of course, because I did not short
CLKX-CLKR,FSX-FSR, DX-DR)
- in mcbsp b (J16 5-6k interface) / MCBSP_DEV1 :
    it returns nothing.

what should I do ? is my 6713 broken ? or 5-6k interface ?

Regards,
Artiko Wibowo

Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video
Transcoding Solution for Commercial & Consumer End Equipment:
www.ti.com/dm6467

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )