Sign in
Search c6x
Subscribe to c6x
c6x by Keywords
AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560
Discussion Groups
See Also
Discussion Groups | TMS320C6x | Help DSK6711 connectors
Technical discussions about the TI C6000 DSPs (including the c62x, c64x and c67x DSPs).
Help DSK6711 connectors - faty najmeddine - Sep 7 9:49:00 2002
|
Hello, I've been trying to use the MDG601-VD DECT module from Inventel (www.inventel.com) daughtercard with the 6711DSK, but have bumped into a problem here. Maybe you folks could provide me with an insight. I'm trying to receive/transmit data from/to the MDG601-VD daughter card via McBSP1 by using the IOM-2 interface with the transmission/reception triggered by an external interrupt,coming from the daughtercard. I've tried the code in the Application Report SPRA569A - August 2001 (by Eric Biscondi Scott Chen, posted on the TI site). I will be pleased if you could help me in connecting the MDG601 DECT module with the dsk6711. How can I connect the peripheral and the memory connector with the connector of the MDG601 daughtercard? Thank you in advance for your help, |
|
|
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )
RE: Help DSK6711 connectors - Jean-Michel MERCIER - Sep 9 13:20:00 2002
|
Hello : You wrote : > I'm trying to receive/transmit data from/to the > MDG601-VD daughter card via McBSP1 by using the IOM-2 As far as I can see the IOM-2 offers a ISDN type of interface which is synchronous and the Inventel module requires an RS232 Asynchonous serial link. Could this be you problem ? If this is your problem, I know that you could find a DSK daugther card with RS232 interface (UART such as 16550). I have no reference here but this should be easy to find. Hope this help. Jean-Michel MERCIER ------------------------------------------------------- dsp & imaging - www.ateme.com ATEME - 26 Burospace - 91573 BIEVRES Tel : +33 (0)1 69 35 89 73 (direct) Fax : +33 (0)1 60 19 13 95 |
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )