AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

hi.I prepared my code and i will take signal out from the emif.but in the 80 pins e.g
which is the ED[7]?what is the number of that?do you have a pdf for this(tms320c6711-emif)?so i
will connect it with cables.thank you.

------------------------------------

OMAP35x EVM jump-starts low-power apps
------------------------------------
The modular and extensible OMAP35x Evaluation Module (EVM) enables developers to start building
applications based on the OMAP35x architecture:http://www.DSPRelated.com/omap35x

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

yunusemrebora,

On 5/13/08, y...@yahoo.com <y...@yahoo.com> wrote:
>
>   hi.I prepared my code and i will take signal out from the emif.but in
> the 80 pins e.g which is the ED[7]?what is the number of that?do you have a
> pdf for this(tms320c6711-emif)?so i will connect it with cables.thank you.
>

I assume that you are asking about the expansion connector on a 6711 DSK.
Refer to the 'help' files under CCS or goto the .../docs/pdf directory.  You
can find
'6711dsk_schematics.pdf' there.

mikedunn

>

-- 
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )