AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Hi..!
Im using a dsk6711 and I made an OFDM system on it.! tx and rx for the IEEE 802.16 standard. 
So my system works perfectly but i would like to simulate a channel for the OFDM signal.!
I've desing all the blocks for the OFDM system and now i've to pass my signal trough a
multipath channel before I receive it.!
here is the thing after the IFFT the signal is in time domain, so I've to make a convolution of
the signal with the vector of the channel but how can i do it?
and when i receive the signal after the FFT i´ve to multiply the receive signal with the
conjugate of the channel in the frecuency domain wich i already know.
Can anyone give me a litte help..
Thanks...!!!

------------------------------------

OMAP35x EVM jump-starts low-power apps
------------------------------------
The modular and extensible OMAP35x Evaluation Module (EVM) enables developers to start building
applications based on the OMAP35x architecture:http://www.DSPRelated.com/omap35x

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )