AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Hello,

I am using TMS320c6412 and  for hardware design I would like to know whether one reset (PCI
PRST) needs to occur before another (DSP RESET). If yes, which RESET should happen first.

Is there any relationship between PCI PRST and DSP RESET?? Does PCI PRST has priority over DSP
RESET?? For hardware design, shall I look for PCI PRST and based on that do DSP RESET???

Any help is appreciated.

-Yatin

------------------------------------

OMAP35x EVM jump-starts low-power apps
------------------------------------
The modular and extensible OMAP35x Evaluation Module (EVM) enables developers to start building
applications based on the OMAP35x architecture:http://www.DSPRelated.com/omap35x

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Yatin,

On Tue, Aug 19, 2008 at 7:48 PM,  <y...@hotmail.com> wrote:
> Hello,
>
> I am using TMS320c6412 and for hardware design I would like to know whether
> one reset (PCI PRST) needs to occur before another (DSP RESET). If yes,
> which RESET should happen first.
>
> Is there any relationship between PCI PRST and DSP RESET?? Does PCI PRST has
> priority over DSP RESET?? For hardware design, shall I look for PCI PRST and
> based on that do DSP RESET???
<mld>
The relationship and behavior of PCI RST and DSP RESET is a bit complicated.
Goto the tms320c6412 product folder at ti.com.  There should be a reference to
'TMS320C6000 DSP Peripheral Component Interconnect (PCI) Reference Guide'
that should have the info that you need.

mikedunn
>
> Any help is appreciated.
>
> -Yatin

-- 
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php

------------------------------------

OMAP35x EVM jump-starts low-power apps
------------------------------------
The modular and extensible OMAP35x Evaluation Module (EVM) enables developers to start building
applications based on the OMAP35x architecture:http://www.DSPRelated.com/omap35x

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )