AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Hi
We have TMS320TCI6488 Mezanine ACM EVM board.
How to load image through ethernet ?
Any configuration setting file or docs on EMAC booting?.
 
Raviraj

_____________________________________

______________________________
Start your Android Ice Cream Sandwich development on TI's AM35x Sitara ARM Cortex-A8 processor today.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

check out this for more on EMAC booting
http://focus.ti.com/lit/ug/spruea7b/spruea7b.pdf
On Tue, Mar 3, 2009 at 5:30 PM, Raviraj B Patil <
r...@tataelxsi.co.in> wrote:

>   Hi
> We have TMS320TCI6488 Mezanine ACM EVM board.
> How to load image through ethernet ?
> Any configuration setting file or docs on EMAC booting?.
>
> Raviraj
>
>  
>

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Hi
>We have TMS320TCI6488 Mezanine ACM EVM board.
>How to load image through ethernet ?
>Any configuration setting file or docs on EMAC booting?.
> 
>Raviraj
>
>_____________________________________
Thanks,
I gone through the pdf.
I did not understand how to Create the Combined (Boot parameter tabel, boot
table & boot configuration table ) EMAC Image, if we have .out file.
Do we need to use TI CCS for creating combined EMAC image ?.
Or any methods, pl. share if any doc for the same.
 
Thanks
Raviraj

_____________________________________

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Hi

Thanks for right link.
I gone through the pdf.
I did not understand how to Create the Combined (Boot parameter tabel, boot
table & boot configuration table ) EMAC Image, if we have .out file.
Do we need to use TI CCS for creating combined EMAC image ?.
Or any methods, pl. share if any doc for the same.

Thanks
Raviraj
  ----- Original Message ----- 
  From: jai kumar 
  To: Raviraj B Patil 
  Cc: a...@yahoo.com ; c...@yahoogroups.com 
  Sent: Tuesday, March 03, 2009 9:49 PM
  Subject: Re: [c6x] TMS320TCI6488 ACM EVM board booting from EMAC/ethernet
  check out this for more on EMAC booting 
  http://focus.ti.com/lit/ug/spruea7b/spruea7b.pdf

  On Tue, Mar 3, 2009 at 5:30 PM, Raviraj B Patil <r...@tataelxsi.co.in>
wrote:

    Hi
    We have TMS320TCI6488 Mezanine ACM EVM board.
    How to load image through ethernet ?
    Any configuration setting file or docs on EMAC booting?.

    Raviraj

The information contained in this electronic message and any attachments to this
message are intended for the exclusive use of the addressee(s) and may contain
proprietary, confidential or privileged information. If you are not the intended
recipient, you should not disseminate, distribute or copy this e-mail. Please
notify the sender immediately and destroy all copies of this message and any
attachments contained in it.

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )