AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

hello friends iam using c6211 dsk and ccs V2.0. in my application i need to control user led's(IO_port)in c6211 dsk board. ,it working fine,my problem is after booting from flash i need to modify EMIF CE1 register to 32 bit asyncrounus mode to access IO port. if write any thing to this register my system wll going some unknown state. without modifying that register if edit in register window its working fine. please any body can suggest how to correct this problem. thanking u...... pani

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )