Sign in
Search c6x
Subscribe to c6x
c6x by Keywords
AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560
Ads
Discussion Groups
Discussion Groups | TMS320C6x | Code Composer v.2.1+ XDS560
Technical discussions about the TI C6000 DSPs (including the c62x, c64x and c67x DSPs).
Code Composer v.2.1+ XDS560 - Henrry Andrian - Jun 9 11:33:00 2003
|
Dear All, I have some question about Code Composer. Currently, I am using Code composer v.2.1 which is distributed together with DSK6711. In my previous email, I have said that I have planned to buy XDS560. I just want to make sure whether XDS560 could work together within my code composer which distributed together with DSK6711 so I mustn't buy the Full Version of the Code Composer (the new version is 2.2). So the question is : Should I buy the Full version Code Composer v.2.2, in order to use the XDS560. And do anyone know the difference between Code Composer v.2.2 with the Code Composer which distributed together with DSK6711. |
|
|
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )
Re: Code Composer v.2.1+ XDS560 - Ganesh Vijayan - Jun 9 12:32:00 2003
|
Hi,
I don't know the version of CCS distributed with DSK6711 but
guess it must be CCS 2.10.
I guess it would be better if you can procure CCS 2.20 as
there are some issues yet with CCS 2.10.
Hope this helps.
Ganesh
|
|
|
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )
Re: Code Composer v.2.1+ XDS560 - henrry - Jun 9 12:44:00 2003
|
--- Ganesh Vijayan <> wrote: > Hi, > I don't know the version of CCS distributed with > DSK6711 but guess it must be CCS 2.10. > I guess it would be better if you can procure CCS > 2.20 as there are some issues yet with CCS 2.10. > Hope this helps. > Ganesh The Code composer version which distributed with DSK6711 is 2.10. According to the XDS510 requirement in TI website that Code Composer ver.2.1 is supporting XDS510. I have discussed with my local TI product distributor but they said that Code composer which distributed with DSK6711 didnt support for XDS510. So I have a little confusion about XDS510 and Code composer which distribution with DSK6711. So I just wonder to know whether if I dont buy the Full version of Code Composer (CCS ver2.2) I still could use the XDS560. Because I have to buy the Code Composer v2.2 It will cost me very much. ===== Best Regards, Henrry Andrian - Researcher ISCI Lab (http://isci.cn.nctu.edu.tw) Office Ph. +886 3 5712121 ext: 54358 Mobile Ph. +886 931198986 National Chiao Tung University (http://www.nctu.edu.tw) Hsinchu - Taiwan, ROC __________________________________ |
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )
Re: Code Composer v.2.1+ XDS560 - Ganesh Vijayan - Jun 9 13:19:00 2003
|
Hi,
XDS560 works satisfactorily with CCS 2.10 or CCS 2.12 but 2.10
is bare minimum.
But if you have some application based on endianess, XDS560
gives some problems as there are some issues still to be cleared.
It isn't mandatory to use CCS 2.20 for XDS560.
Preferably if you have a XDS510PP then its the best JTAG to use with any board.
Hope this solves your problem.
Thanks and Regards,
Ganesh
|
|
|
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )
Re: Code Composer v.2.1+ XDS560 - henrry - Jun 9 13:57:00 2003
|
Hi, Could you give more detail about the problem if I using CCS with XDS560. Are you using both XDS560 and XDS510 ? And could you give me some information about that ? --- Ganesh Vijayan <> wrote: > Hi, > XDS560 works satisfactorily with CCS 2.10 or CCS > 2.12 but 2.10 is bare minimum. > But if you have some application based on endianess, > XDS560 gives some problems as there are some issues > still to be cleared. > It isn't mandatory to use CCS 2.20 for XDS560. > Preferably if you have a XDS510PP then its the best > JTAG to use with any board. > Hope this solves your problem. > Thanks and Regards, > Ganesh ===== Best Regards, Henrry Andrian - Researcher ISCI Lab (http://isci.cn.nctu.edu.tw) Office Ph. +886 3 5712121 ext: 54358 Mobile Ph. +886 931198986 National Chiao Tung University (http://www.nctu.edu.tw) Hsinchu - Taiwan, ROC __________________________________ |
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )
Re: Code Composer v.2.1+ XDS560 - Jerry \Signum\ - Jun 9 15:24:00 2003
|
Henry, The CCS that comes with DSKs will not work with XDS510 or 560. It is a special version just for DSKs (it is only $200-400 so you basically pay only for the board) and you will have to buy a full CCS version when you want to debug your own board. Jerry ----- Original Message ----- From: "Henrry Andrian" <> To: <> Sent: Monday, June 09, 2003 4:33 AM Subject: [c6x] Code Composer v.2.1+ XDS560 > Dear All, > > I have some question about Code Composer. Currently, I am using Code > composer v.2.1 which is distributed together with DSK6711. In my > previous email, I have said that I have planned to buy XDS560. I > just want to make sure whether XDS560 could work together within my > code composer which distributed together with DSK6711 so I mustn't > buy the Full Version of the Code Composer (the new version is 2.2). > So the question is : Should I buy the Full version Code Composer > v.2.2, in order to use the XDS560. > > And do anyone know the difference between Code Composer v.2.2 with > the Code Composer which distributed together with DSK6711. > > > _____________________________________ |
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )