AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

I am working with a DSK6711 and a PCM3003 to develop an acoustic echo canceler. I have develop a loopback program and it seems to work fine, but if I amplify the output of my PCM3003 a good cross-talk appears. Has anyone the some problem and/or knows how to solve it?

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

José- > I am working with a DSK6711 and a PCM3003 to develop an acoustic echo > canceler. I have develop a loopback program and it seems to work fine, > but if I amplify the output of my PCM3003 a good cross-talk appears. Well it's a cheap daughtercard, so hopefully you are not expecting too much. Try this: ground the input externally, then use DSP to output a full scale sine wave. In the DSP code record the level of input you are seeing and compare the ratio of the 2 sine waves. How many dB? It might be that you have a good 40 or 50 dB or so separation, even though you can still see the nasty thing on the scope. Jeff Brower system engineer Signalogic

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )