Sign in

username:

password:



Not a member?

Search c6x



Search tips

Subscribe to c6x



c6x by Keywords

AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Ads

Discussion Groups

Discussion Groups | TMS320C6x | Using AD535 codec on the DSK6711

Technical discussions about the TI C6000 DSPs (including the c62x, c64x and c67x DSPs).

  

Post a new Thread

flashburn: program in memory, but doesn`t start automatic - olaf636 - Nov 21 14:16:00 2003



hey all !

i`ve written a program (120k) and "burned" it with flashburn 2.71 on
the c6713-dsk.
but when i turn off/on the dsk, nothing happens. then i start CCS2, no
loading any projekt but press the "run" button, and after a message
"there is no valid program in CPU" i can see via register-view that my
program is in memory and running.........

there no hint in the help-files for preparing a program for booting,
so did i forget any sequence ?
i`ve followed the steps in the flashburn-onlinehelp in CCS2.

sincerely,

olaf





(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Using AD535 codec on the DSK6711 - whernandez - Nov 21 14:43:00 2003



Dear All,

Could you send me an example of using the AD535 codec on the
DSK6711? I'd like to sample the ADC, then pass the data through an
algorithm, and finally send the results to the DAC.

I'm looking forward to receiving your reply.

Regards, Wilmar.





(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Re: Using AD535 codec on the DSK6711 - Wojciech Rewers - Nov 22 0:07:00 2003

--- whernandez <> wrote:
> Could you send me an example of using the AD535
> codec on the
> DSK6711? I'd like to sample the ADC, then pass the
> data through an
> algorithm, and finally send the results to the DAC.

if you're new to C6711DSK - I'd start with BSL (Board
Support Library) - there is API for AD535...

you can download the library from here:
http://www.wrewers.karolin.pl/BoardSupportLibrary.zip

good luck...

Wojciech Rewers

__________________________________





(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )