Sign in

username:

password:



Not a member?

Search c6x



Search tips

Subscribe to c6x



c6x by Keywords

AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Sponsor

Industry's highest performing at the lowest power DSPs now as low as $5.00*
Start development today!
*volume pricing for 10ku

Discussion Groups

See Also

Embedded SystemsFPGAElectronics

Discussion Groups | TMS320C6x | Daughter Cards for the C6711 DSK

Technical discussions about the TI C6000 DSPs (including the c62x, c64x and c67x DSPs).

  

Post a new Thread

Daughter Cards for the C6711 DSK - Kareem - Mar 22 18:39:00 2004

Hi.... My name is Kareem and I am working on a senior design project
at the University of Missouri, Kansas City. I am designing a noise
cancelling headphone uing active noise control. I am developing my
LMS algorithm using Code Composer and the DSK board. My question is
this:
What would you recommend as a suitable daughter card to interface
with my DSK board, keeping in mind that I will need to solder my
peripheral circuitry onto this board. That will include my speakers,
mics, and the Burr Brown A/D and D/A convertors.
Appreciate the help!



______________________________
Start your Android Ice Cream Sandwich development on TI's AM35x Sitara ARM Cortex-A8 processor today.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Re: Daughter Cards for the C6711 DSK - Author Unknown - Mar 23 2:14:00 2004

In a message dated 3/22/2004 2:10:12 PM Eastern Standard Time, k...@hotmail.com writes:
Hi.... My name is Kareem and I am working on a senior design project
at the University of Missouri, Kansas City. I am designing a noise
cancelling headphone uing active noise control. I am developing my
LMS algorithm using Code Composer and the DSK board. My question is
this:
What would you recommend as a suitable daughter card to interface
with my DSK board, keeping in mind that I will need to solder my
peripheral circuitry onto this board. That will include my speakers,
mics, and the Burr Brown A/D and D/A convertors.
Appreciate the help!
I assume that you are using a C6711 or C6211 DSK.  I think the AIC23 daughter board is what you need.  It is not a Burr Brown Codec, it is a TI stereo codec (very good).  I'd search the TI website and look for the 3rd party vendor for this board.  I don't know if it includes a mic circuitry, but I think you should be able to add it as per your mic's requirement.
 
/Khalid


______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )