AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

I have many questions: - COFF files compiled for the C6701 couldn't be loaded by the Code Composer 4.0 (with load6x works ok), but those targeted for the c6201 work fine. - I have written a simple test program that reset the dsp, send it a short vector with evm6x_hpi_write functions, wait a moment, while the DSP operate the vector (multiplying by 2), and then read the vector, but the result is that the vector is set to zeros. What's wrong? - How I can get the mailboxes working? If I do a WaitForObjectCall (...) in the host side and after the dsp writes in one of the mailbox registers, the host doesn't awaken , and viceversa, if the host send a message with the evm6x_send_mesage functines, how i do for the dsp getting an interrupt? How about ths AINT and AGBSTS registers? I can't find anything in documentation about them. An example would be apreciated Thanks in advance.

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )