Sign in
Search c6x
Subscribe to c6x
c6x by Keywords
AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560
Sponsor
Discussion Groups
See Also
Discussion Groups | TMS320C6x | read write from hard-disk
Technical discussions about the TI C6000 DSPs (including the c62x, c64x and c67x DSPs).
read write from hard-disk - swapnali patil - Jun 10 9:34:00 2005
HI! all
can any 1 help for Reading & Writting a *.bmp file to & from the
hard-disk, the code is perfectly working with VC++ editor, while running
same code on CCS giving Message as follows.
Trouble running Target CPU:
Error 0x0000000C/-2044 Error during: Register, Break Point, No breakpoint
at 0x74000114 Sequence ID: 16 Error Code: -2044 Error Class:
0x0000000C
Error: Error 0x0000000C/-2044 Error during: Register, Break Point, No breakpoint at 0x74000114 Sequence ID: 16 Error Code: -2044 Error Class: 0x0000000C
Trouble Halting Target CPU: Error 0x0000000C/-2044 Error during: Register, Break Point, No breakpoint at 0x74000114 Sequence ID: 16 Error Code: -2044 Error Class: 0x0000000C
Failed to remove the debug state from the target before disconnecting. There may still be breakpoint opcodes em
Error: Error 0x0000000C/-2044 Error during: Register, Break Point, No breakpoint at 0x74000114 Sequence ID: 16 Error Code: -2044 Error Class: 0x0000000C
Trouble Halting Target CPU: Error 0x0000000C/-2044 Error during: Register, Break Point, No breakpoint at 0x74000114 Sequence ID: 16 Error Code: -2044 Error Class: 0x0000000C
Failed to remove the debug state from the target before disconnecting. There may still be breakpoint opcodes em
and Sout as
Invalid CIO command
(255).
i think i am missing the CCS specific,functions, i am using the Fwrite
& Fread.i.e. not working
Too much spam in your inbox? Yahoo! Mail gives you the best spam protection for FREE!
http://in.mail.yahoo.com
______________________________
Start your Android Ice Cream Sandwich development on TI's AM35x Sitara ARM Cortex-A8 processor today.
(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )