Sign in

username:

password:



Not a member?

Search c6x



Search tips

Subscribe to c6x



c6x by Keywords

AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560


Discussion Groups

See Also

Embedded SystemsFPGAElectronics

Discussion Groups | TMS320C6x | using Mcbsp as UART ?


Technical discussions about the TI C6000 DSPs (including the c62x, c64x and c67x DSPs).

  

Post a new Thread

using Mcbsp as UART ? - Muoi Nho - Jun 1 8:56:26 2006

Hi all
  I'd like to use Mcbsp of TMS320C6713 as UART. I found some information  in the
application note spra633b.pdf of TI and it seems difficult.
  If anyone has use it, please tell me yours comments. Is It a good method or
bad method ? etc...
  Thank you in advance !
  Muoinho

---------------------------------
Be a chatter box. Enjoy free PC-to-PC calls  with Yahoo! Messenger with Voice.
______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Re: using Mcbsp as UART ? - Bernhard Gustl Bauer - Jun 1 9:11:10 2006

Hi,

I'm using it for a remote control. It spares you an external UART, but 
it costs you some internal resources (MCBSP-Pin, Time, Code, Data ...). 
It works for me. I had some problems there was a bug in the spra but I 
think it is fixed in Rev. B

HTH

Gustl

Muoi Nho schrieb:
> Hi all
> I'd like to use Mcbsp of TMS320C6713 as UART. I found some information 
> in the application note spra633b.pdf of TI and it seems difficult.
> If anyone has use it, please tell me yours comments. Is It a good method 
> or bad method ? etc...
> Thank you in advance !
> Muoinho
> 
> ------------------------------------------------------------------------
> Be a chatter box. Enjoy free PC-to-PC calls 
>
<http://us.rd.yahoo.com/mail_us/taglines/postman12/*http://us.rd.yahoo.com/ev
t=39663/*http://messenger.yahoo.com> 
> with Yahoo! Messenger with Voice.
> 
>      
> ------------------------------------------------------------------------
>
______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Re: using Mcbsp as UART ? - Mike Dunn - Jun 1 9:51:32 2006

Muoinho,

----- Original Message ----
From: Muoi Nho <m...@yahoo.com>
To: c6x group <c...@yahoogroups.com>
Sent: Thursday, June 1, 2006 3:46:31 AM
Subject: [c6x] using Mcbsp as UART ?

Hi all
I'd like to use Mcbsp of TMS320C6713 as UART. I found some information in the
application note spra633b.pdf of TI and it seems difficult.
If anyone has use it, please tell me yours comments. Is It a good method or bad
method ? etc...
[mld] 
1. For details, please refer to the archives for several discussions on the
topic.
2. If you have 'spare MIPS' and do not need high speed receive, it can work ok
for many apps.  If the DSP is mostly/only transmitting, it can be very useful -
again, depending on your application/use.
mikedunn

Thank you in advance !
Muoinho

Be a chatter box. Enjoy free PC-to-PC calls with Yahoo! Messenger with Voice.
______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )