AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Hi folks

I have a c6713 DSK and a UART Daughtercard from Windmill Innovations. I want to Tx the value of
a potenciometer, connected to a microcontroller's AD and send this value to the DSK through
this UART Daughtercard. I'm using the example program loop_intr from the Chassaing book
"Digital Signal Processing and Applications with the C6713 and C6416 DSK", this
program is an interrupt-driven using INT11, it's for audio purposes.

The thing is I'm newbie with this and I have not much idea of how to do it. Could anybody give
me some tips to make this work out? or a detailed steps to run the program please... that will
be must appreciate

Thanx guys

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )