AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Which one is low cost JTAG emulator for TI DaVinci DM6446?
Spectrum Digital XDS510 USB seems to be very good choice, but quite 
expensive.

If someone is planning to sell any JTAG emulator (used) which can work 
with DaVinci DM6446, please let me know.

Thanks and Regards,
jigs_dsp

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

JIGS-

> Which one is low cost JTAG emulator for TI DaVinci DM6446?
> Spectrum Digital XDS510 USB seems to be very good choice, but quite
> expensive.
>
> If someone is planning to sell any JTAG emulator (used) which can work
> with DaVinci DM6446, please let me know.

Normally I would recommend SEED USB emulator as a low-cost choice.  However,
we've not been able to get it to work
reliably yet with 67xx devices.  That is a vexing problem for us.

We have an outstanding "Answer Offer" of USD 100 for anyone who can
demonstrate how to configure and run the SEED USB
emulator with DSK C6711 board.

-Jeff

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Ray-

> I have a few question. I have a TI XDS560 PCI card but I can't find the
> cable that came with it. Plus I never really used the emulator before so I
> have definately no clue how to use it. I want to play with the card but
I'm
> not sure where to start.

I've never used the XDS560 PCI card, so I don't know about it.  I would think
the
JTAG header cable for the card should be something you can find or maybe your
TI
salesperson who takes care of your University can help with.  Your Prof should
know
who is the TI person.

> Another question is, I'm using CCS v3.1 for my C6713 DSK but is there
anyway
> I can upgrade to v3.2?

You could but don't do that, or at least not yet.  v3.2 is intended for C64x+
core
devices such as 6455.  You can use the Update Advisor in CCS to download
current
patches and files for v3.1.

-Jeff

> > > Jeff Brower <j...@signalogic.com> wrote:
> > >
> > >      JIGS-
> > >
> > >      > Which one is low cost JTAG emulator for TI DaVinci
DM6446?
> > >      > Spectrum Digital XDS510 USB seems to be very good
choice, but
> >quite
> > >      > expensive.
> > >      >
> > >      > If someone is planning to sell any JTAG emulator (used)
which can
> >work
> > >      > with DaVinci DM6446, please let me know.
> > >
> > >      Normally I would recommend SEED USB emulator as a low-cost
choice.
> > >      However, we've not been able to get it to work
> > >      reliably yet with 67xx devices. That is a vexing problem for
us.
> > >
> > >      We have an outstanding "Answer Offer" of USD 100
for anyone who can
> > >      demonstrate how to configure and run the SEED USB
> > >      emulator with DSK C6711 board.
> > >
> > >      -Jeff

______________________________
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.



(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )