AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Hi, 
I must write 4M samples to SDRAM on this board and I'm not sure how to
write it. Generally in .cmd file we've got sections and there is for
example: ".far > BMEM", so i think .far section is set on SDRAM,
right? or not? What means letter B in short BMEM? 
I'm not good in DSP so correct me if i'm wrong: to write samples in
SDRAM i should set (by registers) SDRAM controller? EMIF?
I don't know what to do?

Regards,
nstn

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )