AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Hi all:

I am working on DM6446 and I using CCS3.2. I calling DMAN3 and ACPY3 to do DMA.

Now I am using DSP/BIOS.

I find that, my DMA work fails. It never comes out from ACPY3_wait.

So could anyone tell me what heppen with it ?
Thanks 

B.R.

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )

Hi,

I have used the DMA on CCS3.2. I was able to run it perfectly. Please check
the intialisation of the channels once again. Though if you are unable to
run completely then explain the situation where you are facing the problem.

Means let me know about the intialisations and what are the channels that
you are using.
On 7/24/07, guchanghai <g...@csvision.cn> wrote:
>
>   Hi all:
>
> I am working on DM6446 and I using CCS3.2. I calling DMAN3 and ACPY3 to do
> DMA.
>
> Now I am using DSP/BIOS.
>
> I find that, my DMA work fails. It never comes out from ACPY3_wait.
>
> So could anyone tell me what heppen with it ?
>
> Thanks
>
> B.R.
>  
>

(You need to be a member of c6x -- send a blank email to c6x-subscribe@yahoogroups.com )