Model { Name "Transmitter" Version 6.2 MdlSubVersion 0 GraphicalInterface { NumRootInports 0 NumRootOutports ...

Model { Name "Transmitter" Version 6.2 MdlSubVersion 0 GraphicalInterface { NumRootInports 0 NumRootOutports 0 ParameterArgumentNames "" ComputedModelVersion "1.137" NumModelReferences 0 NumTestPointedSignals 0 } SavedCharacterEncoding "ibm-5348_P100-1997" SaveDefaultBlockParams on SampleTimeColors on LibraryL...

Hi folks, I am wondering how I can set the refresh rate in CCS 3.1 during real-time mode. Any help will be greatly appreciated. Best...

Hi folks, I am wondering how I can set the refresh rate in CCS 3.1 during real-time mode. Any help will be greatly appreciated. Best regards, Zeki Akcali

Hello Debi, You have to change the Gel file for CCS 3.1 versions.. A small changes have to be done on older version Gel files (CCS...

Hello Debi, You have to change the Gel file for CCS 3.1 versions.. A small changes have to be done on older version Gel files (CCS 2.1). please check out the application report " SPRAA74A". Hope this helps you out. Regards Prabhakar ----- Original Message ----- From: Debi Das To: c...@yahoogroups.com Sent: Wednesday, June 14, 2006 12:13 PM Subject: [code-comp] OMAP...

Hi I want to begin working with omap 1510 and write a simple code of convolution on code composer(arm passes the values to dsp processor and...

Hi I want to begin working with omap 1510 and write a simple code of convolution on code composer(arm passes the values to dsp processor and dsp returns them back to arm)just to get an idea that how arm and dsp communicate.I need some direction ..... how to proceed. Thanks for the earlier replies...they worked. Thanks Rashmi

Hi, I'm using CCS version 3.2 with build tools version 39.5. In my application, I have a wrapper (executable project) and many algo libraries...

Hi, I'm using CCS version 3.2 with build tools version 39.5. In my application, I have a wrapper (executable project) and many algo libraries linked to the main application. For each of the wrapper file(*.c/*.cpp) CCS creates a ".const" section with some size allocated. In my application this "extra const section" is of 2Kb size. I excluded all *.c and *.h files except a main(doesn't ha...

Hi All, I am a graduate student at UC Berkeley? I recently joined a research group and got involved in the DSP project? We have developed...

Hi All, I am a graduate student at UC Berkeley? I recently joined a research group and got involved in the DSP project? We have developed some DSP code for our project and used the following tools: We used to build and compile the code using the CCStudio C5510 DSK version 2.1 when it was connected to the DSK board. Then, we took the .out file and used the CCStudio EVAL version 3.1 to load...

Maryam V- > I am a graduate student at UC Berkeley? I recently joined a research > group and got involved in the DSP project? We have...

Maryam V- > I am a graduate student at UC Berkeley? I recently joined a research > group and got involved in the DSP project? We have developed some > DSP code for our project and used the following tools: > > We used to build and compile the code using the CCStudio C5510 DSK > version 2.1 when it was connected to the DSK board. Then, we took the > .out file and used the CCStudio EVAL

hy all, I want to generate c files with matlab instead of writing my own c files. So I used this command : mcc -t -L C file.m which...

hy all, I want to generate c files with matlab instead of writing my own c files. So I used this command : mcc -t -L C file.m which generates a file.c and file.h. Then I included file.h in my CCS project and called my file.c in main.c of CCS project. But when I try to build my project I ve got the following error message (during the 'linking'): undefined ...

Dear Radu, As far as I can see you are using the external memory to download the code. I am having the same problem whenever I would like to...

Dear Radu, As far as I can see you are using the external memory to download the code. I am having the same problem whenever I would like to use Full Memory Map option from DSPTgtPkg Target Preferences Menu :((. Matlab and TI support could not resolve the issue yet. The interesting thing is I am trying to run the demos provided by Matlab. (e.g. PWM Duty Cycle Control via Period Change c28...

Hi, i have generated an CCS project from Simulink using Embedded Traget blockset for the TI TMS320F2812 DSP.When i try to load the .out file to...

Hi, i have generated an CCS project from Simulink using Embedded Traget blockset for the TI TMS320F2812 DSP.When i try to load the .out file to the board i receive the error: "Data verification failed at address 0x3FFFC2. Please verify target memory and memory map." The momry map file loks like: MEMORY { PAGE 0: /* Program Memory */ ZONE6 : origin = 0x100000, length ...