Sign in
Search code-comp
Subscribe to code-comp
code-comp by Keywords
ARM7 | BIOS | Bug | EVM | JTAG | Linker | LOG_printf | McBSP | Profiling | Relocation | RTDX | Simulator | Target | Watch
Discussion Groups
Discussion Groups | Code-Composer | TMDX3260E6416E error ?
TMDX3260E6416E error ? - v_christ - Sep 4 20:24:00 2003
|
C6416 TEB with CCS & 510PP+ Emulator w Euro Cord. (TMDX3260E6416E) I follow the instructions from C6416 TEB quick start guide and the XDS510PP plus JTAG emulator Code composer/studio development tools setup instructions. Unfortunately the code composer studio did not start. After the setup the error "Can't Initialize Target CPU: Error 0x80000200/-118, Fatal Error during OCS, This error was generated by TI's USCIF driver. SC_ERR_CTL_PORT <-118>......" was appeared. I tried all the possible combinations (EPP, ECP+EPP,SPP8) (I/O 278, 378) from BIOS but nothing happened. I reset the emulator through SDConfig and the diagnostics was with 0 errors, but emulator test gives this result. ** Checking emulator/eZdsp scan connection ** Emulator Test ** $$ EmuProductName=XDS510PP_PLUS $$ EmuPortAddr=0x378 $$ EmuPortMode=EPP $$ ProductId=10 $$ ProductVersion=02 ** Emulator Scan Test ERROR >> JTAG DR scan test failed >> Check power to your emulator/eZdsp >> Then check your port mode/address The operating system is win2000 sp3. All the drivers are updated Could you please help me. Thanks in advanced. |
|
|
(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )
Re: TMDX3260E6416E error ? - Iota Asterix - Sep 8 5:25:00 2003
|
Hi, Try checking the power to JTAG. Also Check the port address. If you are using XDS510/PP use 0x378. I guess this shld help you. GV ----- Original Message ----- From: "v_christ" <> To: <> Sent: Friday, September 05, 2003 1:54 AM Subject: [code-comp] TMDX3260E6416E error ? > C6416 TEB with CCS & 510PP+ Emulator w Euro Cord. (TMDX3260E6416E) > > I follow the instructions from C6416 TEB quick start guide and the > XDS510PP plus JTAG emulator Code composer/studio development tools > setup instructions. > > Unfortunately the code composer studio did not start. After the setup > the error "Can't Initialize Target CPU: Error 0x80000200/-118, Fatal > Error during OCS, This error was generated by TI's USCIF driver. > SC_ERR_CTL_PORT <-118>......" was appeared. I tried all the possible > combinations (EPP, ECP+EPP,SPP8) (I/O 278, 378) from BIOS but nothing > happened. > > I reset the emulator through SDConfig and the diagnostics was with 0 > errors, but emulator test gives this result. > > ** Checking emulator/eZdsp scan connection > ** Emulator Test ** > $$ EmuProductName=XDS510PP_PLUS > $$ EmuPortAddr=0x378 > $$ EmuPortMode=EPP > $$ ProductId=10 > $$ ProductVersion=02 > ** Emulator Scan Test > ERROR >> JTAG DR scan test failed > >> Check power to your emulator/eZdsp > >> Then check your port mode/address > The operating system is win2000 sp3. > All the drivers are updated > > Could you please help me. > Thanks in advanced. > > _____________________________________ |
(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )