ARM7 | BIOS | Bug | EVM | JTAG | Linker | LOG_printf | McBSP | Profiling | Relocation | RTDX | Simulator | Target | Watch

Hello everyone,=20

Im an undergraduate student and recently I have become involved in a
TI   DSP project. We have a problem with upgrading our CCS. The same
code which was written in v2.1 and works correctly in old version
doesn't work in v3.1. It seems that there are some differences in the
location of folders since I had to change the location of one library
file which was included in build options (while that might not have
anything to do with our problem)!=20

what happens is I can compile and download the code into the chip but
it doesn't work after that!! Can anyone help me with this problem??
Please consider that I'm very new to the DSP world!

Our lab will greatly appreciate your help.=20

Thanks.=20
Arash Parsa.=20

=20

=20

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )

I hate to admit it but I had the same problem when I updated to 3.1.  I
looked at the obvious build options and could not find any differences.
I did notice that the code was a different size from code built in 2.2.
At the time the product I was working on was going into full production
and I didn't have time to figure it out so I gave up on the upgrade.  No
one else had reported this problem so I assumed there was something in
my setup.

If you still have the old version installed a quick work around is to
direct 3.1 to use the old build tools.  Click on help/about/component
manager.  When you expand the build tools it should show either version.
I was able to build bit compatible image in 3.1 using the 2.2 compiler.
Not a solution but it will get you going until you can figure out what
the problem is.

Don Truex

Electronics Engineer

Hennessy Industries Inc.

1601 JP Hennessy Drive

Lavergne TN 37086-3565

615.641.7533 x7285

800.688.6359 x7285

615.641.1320 fax

________________________________

From: c...@yahoogroups.com [mailto:c...@yahoogroups.com] On
Behalf Of arash_p60
Sent: Wednesday, May 03, 2006 10:53 PM
To: c...@yahoogroups.com
Subject: [code-comp] migrating problems from 2.1 to 3.1!!

Hello everyone, 

Im an undergraduate student and recently I have become involved in a
TI   DSP project. We have a problem with upgrading our CCS. The same
code which was written in v2.1 and works correctly in old version
doesn't work in v3.1. It seems that there are some differences in the
location of folders since I had to change the location of one library
file which was included in build options (while that might not have
anything to do with our problem)! 

what happens is I can compile and download the code into the chip but
it doesn't work after that!! Can anyone help me with this problem??
Please consider that I'm very new to the DSP world!

Our lab will greatly appreciate your help. 

Thanks. 
Arash Parsa.

________________________________

This message (including any attachments) contains confidential 
and/or proprietary information intended only for the addressee.  
Any unauthorized disclosure, copying, distribution or reliance on 
the contents of this information is strictly prohibited and may 
constitute a violation of law.  If you are not the intended 
recipient, please notify the sender immediately by responding to 
this e-mail, and delete the message from your system.  If you 
have any questions about this e-mail please notify the sender 
immediately.  
 
Ce message (ainsi que les 'eventuelles pi`eces jointes) est exclusivement 
adress'e au destinataire et contient des informations confidentielles. 
La 
copie, la communication ou la distribution du contenu de ce message 
sans 
l'accord pr'ealable de l'exp'editeur sont strictement interdites et 
peuvent constituer un d'elit. Si vous n'^etes pas le destinataire de ce 
message, merci de le d'etruire et d'avertir l'exp'editeur. Si vous avez 
des questions se rapportant `a ce courrier 'electronique, merci de bien 
vouloir notifier l'exp'editeur imm'ediatement.

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )