ARM7 | BIOS | Bug | EVM | JTAG | Linker | LOG_printf | McBSP | Profiling | Relocation | RTDX | Simulator | Target | Watch

Hi,
i have generated an CCS project from Simulink using Embedded Traget blockset
for the TI TMS320F2812 DSP.When i try to load the .out file to the board
i receive the error:
"Data verification failed at address 0x3FFFC2.
Please verify target memory and memory map."
    
 The momry map file loks like:
  MEMORY
{
PAGE 0:    /* Program Memory */
   ZONE6       : origin = 0x100000, length = 0x008000
   OTP         : origin = 0x3D7800, length = 0x000800
   BEGIN       : origin = 0x3F7FF6, length = 0x000002
   RAMH0       : origin = 0x3F8000, length = 0x002000
   ROM         : origin = 0x3FF000, length = 0x000FC0
   RESET       : origin = 0x3FFFC0, length = 0x000002
   VECTORS     : origin = 0x3FFFC2, length = 0x00003E
PAGE 1 :   /* Data Memory */
  
I have read the Boot Rom Reference Guide from TI. The 
board is configured to work as microcontroller and
that memory zone should be accessible. I have also
noticed that memory location  0x3F FFC2 is reserved.
I some one had more to do with the memory mapping
and could give me a hand i would appreciate.
Tank you very much.

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )