ARM7 | BIOS | Bug | EVM | JTAG | Linker | LOG_printf | McBSP | Profiling | Relocation | RTDX | Simulator | Target | Watch

Hi everbody,

I am working with Code Composer 3.1 developing code for TMS32F2808 device.
Actually I'm getting a very serious problem shortly after I install
CCS3.1(Actually I did
this installation several times). The problem is that all codes I developed
which are
supppsed to be in "Sources" section of project explorer in CCS are moved to
Documents and the
software don't detect any code or header except cmd files.
I wonder if somebody could help me out.

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )

Not 100% sure but maybe its a path issue:

Check your precompiler path settings under "build options", I think thats 
in the "debug menu". Make sure all locations of your files are included in 
the path.

Do your files have the correct extensions?

Hope that helps

"Rahman DoostMohammady" <d...@gmail.com> 
Sent by: c...@yahoogroups.com
04/19/2007 05:31 PM

To
c...@yahoogroups.com
cc

Subject
[code-comp] Problem with Project Load in CCS3.1

Hi everbody,
I am working with Code Composer 3.1 developing code for TMS32F2808 device. 

Actually I'm getting a very serious problem shortly after I install CCS3.1 
(Actually I did 
this installation several times). The problem is that all codes I 
developed which are 
supppsed to be in "Sources" section of project explorer in CCS are moved 
to Documents and the
software don't detect any code or header except cmd files. 
I wonder if somebody could help me out.

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )

Do your source files have a .c, .cpp or .asm extenstion? Mostly these type
files will go into the Sources project folder. Unknown types end up in the Documents folder.

Tony

  ----- Original Message ----- 
  From: Rahman DoostMohammady 
  To: c...@yahoogroups.com 
  Sent: Thursday, April 19, 2007 1:31 AM
  Subject: [code-comp] Problem with Project Load in CCS3.1
  Hi everbody,

  I am working with Code Composer 3.1 developing code for TMS32F2808 device. 
  Actually I'm getting a very serious problem shortly after I install CCS3.1 (Actually I did 
  this installation several times). The problem is that all codes I developed which are 
  supppsed to be in "Sources" section of project explorer in CCS are moved to
Documents and the
  software don't detect any code or header except cmd files. 
  I wonder if somebody could help me out.

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )

  
 Hi,
  Check whether you r using latest cgtools which is updated for ur version of ccs or not.
cgtools include lin,bin and include directories.
This problem appeares, if those 3 folders doesn't contain all updated files, especially bin
folder.
  try this, i hope this will definitely solve ur problem.

sravanthi

On Fri, 20 Apr 2007 D...@dynamiccontrols.com wrote :
>Not 100% sure but maybe its a path issue:
>
>Check your precompiler path settings under "build options", I think thats
>in the "debug menu". Make sure all locations of your files are included in
>the path.
>
>Do your files have the correct extensions?
>
>Hope that helps
>
>"Rahman DoostMohammady" <d...@gmail.com>
>Sent by: c...@yahoogroups.com
>04/19/2007 05:31 PM
>
>To
>c...@yahoogroups.com
>cc
>
>Subject
>[code-comp] Problem with Project Load in CCS3.1
>Hi everbody,
>I am working with Code Composer 3.1 developing code for TMS32F2808 device.
>
>Actually I'm getting a very serious problem shortly after I install CCS3.1
>(Actually I did
>this installation several times). The problem is that all codes I
>developed which are
>supppsed to be in "Sources" section of project explorer in CCS are moved
>to Documents and the
>software don't detect any code or header except cmd files.
>I wonder if somebody could help me out.
>
  SRAVANTHI

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )

Hi,
I only have .c and .asm files in my project (also the header files).
Everything and every option is in place! Actually After I am installing the
CCS, first time I open it, everything properly works, the project gets
compiled and built. But after several times I open&close the program,
suddenly and for no specific reason it breaks and I see that all my files
included in the project are moved to Documents. This time when I close
the program it gets the following error message:

Unexpected fatal error encountered which may have been caused by a stack
overflow, out of memory condition or access violation.

 There are some other sympoms. For example, the Compile tab in Build Option
menu disappears! Actually it's a strange problem. Some of my friends
confronted with that but after they reinstalled CCS, it was solved but for
me not.
I appreciate your help very much.

Rahman
<c...@yahoogroups.com>

On 4/20/07, Tony (DSPG) <t...@dspglobal.com> wrote:
>
>  Do your source files have a *.c*, *.cpp* or *.asm* extenstion? Mostly
> these type
> files will go into the *Sources* project folder. Unknown types end up in
> the *Documents* folder.
>
> Tony
> ----- Original Message -----
> *From:* Rahman DoostMohammady <d...@gmail.com>
> *To:* c...@yahoogroups.com
> *Sent:* Thursday, April 19, 2007 1:31 AM
> *Subject:* [code-comp] Problem with Project Load in CCS3.1
>
> Hi everbody,
>
> I am working with Code Composer 3.1 developing code for TMS32F2808 device.
>
> Actually I'm getting a very serious problem shortly after I install CCS3.1(Actually I did
> this installation several times). The problem is that all codes I
> developed which are
> supppsed to be in "Sources" section of project explorer in CCS are moved
> to Documents and the
> software don't detect any code or header except cmd files.
> I wonder if somebody could help me out.
>

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )

Rahman-

> I only have .c and .asm files in my project (also the header files).
> Everything and every option is in place! Actually After I am installing the
> CCS, first time I open it, everything properly works, the project gets
> compiled and built. But after several times I open&close the program,
> suddenly and for no specific reason it breaks and I see that all my files
> included in the project are moved to Documents. This time when I close
> the program it gets the following error message:
>
> Unexpected fatal error encountered which may have been caused by a stack
> overflow, out of memory condition or access violation.
>
>  There are some other sympoms. For example, the Compile tab in Build Option
> menu disappears! Actually it's a strange problem. Some of my friends
> confronted with that but after they reinstalled CCS, it was solved but for
> me not.
> I appreciate your help very much.

Are you using Microsoft Vista?

-Jeff

>
> On 4/20/07, Tony (DSPG) <t...@dspglobal.com> wrote:
>>
>>  Do your source files have a *.c*, *.cpp* or *.asm* extenstion? Mostly
>> these type
>> files will go into the *Sources* project folder. Unknown types end up in
>> the *Documents* folder.
>>
>> Tony
>> ----- Original Message -----
>> *From:* Rahman DoostMohammady <d...@gmail.com>
>> *To:* c...@yahoogroups.com
>> *Sent:* Thursday, April 19, 2007 1:31 AM
>> *Subject:* [code-comp] Problem with Project Load in CCS3.1
>>
>> Hi everbody,
>>
>> I am working with Code Composer 3.1 developing code for TMS32F2808 device.
>>
>> Actually I'm getting a very serious problem shortly after I install CCS3.1(Actually I
did
>> this installation several times). The problem is that all codes I
>> developed which are
>> supppsed to be in "Sources" section of project explorer in CCS are moved
>> to Documents and the
>> software don't detect any code or header except cmd files.
>> I wonder if somebody could help me out.
>

(You need to be a member of code-comp -- send a blank email to code-comp-subscribe@yahoogroups.com )