56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

Hi, I would like to use indirect addressing using the offset register on the DSP56303 chipset. However, the simulator tells me that such an instruction takes 25 clock cycles to execute ! I do not see any reason for it being this high, so i was wondering if this might be a simulator issue.... Also, while we're on the subject of clock cycles, does Motorola have a document listing the amount of clock cycles required by each instruction depending on the addressing modes, etc ? Thanks in advance, Guillaume

(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )

Guillaume, It shouldn't take 25 cycles to execute a move like you describe. The simulator is cycle accurate so there is something else going on there. All the insturction timings are described in Appendix A of the 56300 Family Manual... -- dB --- GuillaumeDesj <> wrote: > Hi, > > I would like to use indirect addressing using the offset register on > the DSP56303 chipset. > > However, the simulator tells me that such an instruction takes 25 > clock cycles to execute ! I do not see any reason for it being this > high, so i was wondering if this might be a simulator issue.... > > Also, while we're on the subject of clock cycles, does Motorola have > a document listing the amount of clock cycles required by each > instruction depending on the addressing modes, etc ? > > Thanks in advance, > Guillaume __________________________________

(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )