Sign in
Search motoroladsp
Subscribe to motoroladsp
motoroladsp by Keywords
56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI
Discussion Groups
See Also
Discussion Groups | Freescale DSPs | MC56F8300DSK Problem
Technical discussions about Freescale (Motorola) DSPs (including the DSP56000, DSP56300, DSP56600, 56800 DSPs).
MC56F8300DSK Problem - ev64bug - Nov 3 16:57:00 2003
|
Hi, I'm new to this group. I just recieved the MC56F8300DSK Demo Kit. I first had the fun of not being able to install the Codewarrior CD on my XP machine, the install shield kept giving an error, so I downloaded the file directly from Metrowerks and requested the free 8k permanent license. Codewarrior seems to be real touchy, it runs very slowly and it only works if I haven't launched any other applications otherwise it just about freezes up. So even though it doesn't say that it is Windows 95 compatable I tried installing it on an older machine and the CD worked without a hitch. Yea. So here is the question. I was able to start a real simple project (turn on an LED) and it compiled and linked when I pressed the Debug button, then it gave and error "CCSProtocolPlugin: CCS: Network fault" Does anyone know what this error is from? Do I have to change any settings from the Default to get it to communicate with the Demo Board? Thanks in advance. |
|
|
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.
(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )
RE: MC56F8300DSK Problem - Louis Loving - Nov 4 14:37:00 2003
|
Hello,
I am using DSP56858EVM and originally I also got the same error
message. I would keep trying and usually by the third or fourth try it
would start working. Once it started working, I wouldn't have any trouble
again for the rest of the day. The next morning, or any other time
that I rebooted, I would get the same message once
again.
-Louis
|
|
|
(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )
Re: MC56F8300DSK Problem - isierra95 - Nov 5 22:46:00 2003
|
When you created this project which stationery did you select for this Demo board? There is a jumper on the board that you need to enable to use this board. The jumper is 'HOST ENABLE' and needs to be jumpered in order to connect to the board. Regards, Irene --- In , "ev64bug" <ev64bug@y...> wrote: > Hi, > I'm new to this group. I just recieved the MC56F8300DSK Demo Kit. I > first had the fun of not being able to install the Codewarrior CD on > my XP machine, the install shield kept giving an error, so I > downloaded the file directly from Metrowerks and requested the free > 8k permanent license. Codewarrior seems to be real touchy, it runs > very slowly and it only works if I haven't launched any other > applications otherwise it just about freezes up. So even though it > doesn't say that it is Windows 95 compatable I tried installing it on > an older machine and the CD worked without a hitch. Yea. > > So here is the question. I was able to start a real simple project > (turn on an LED) and it compiled and linked when I pressed the Debug > button, then it gave and error "CCSProtocolPlugin: CCS: Network fault" > > Does anyone know what this error is from? > > Do I have to change any settings from the Default to get it to > communicate with the Demo Board? > > Thanks in advance. |
|
|
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.
(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )
Re: MC56F8300DSK Problem - ev64bug - Nov 7 22:25:00 2003
|
I did set the 'HOST ENABLE' jumper (I got a different error something about the cable not present until I figure that one out). The stationery I used was the 'DSP56800x EABI stationery'. I used this one because it was shown in the exaples on the Motorola Documentation CD that accompanied the Demo Kit. Thanks, Rex --- In , "isierra95" <isierra95@y...> wrote: > When you created this project which stationery did you select for > this Demo board? There is a jumper on the board that you need to > enable to use this board. The jumper is 'HOST ENABLE' and needs to > be jumpered in order to connect to the board. > > Regards, > Irene > > --- In , "ev64bug" <ev64bug@y...> wrote: > > Hi, > > I'm new to this group. I just recieved the MC56F8300DSK Demo Kit. > I > > first had the fun of not being able to install the Codewarrior CD > on > > my XP machine, the install shield kept giving an error, so I > > downloaded the file directly from Metrowerks and requested the > free > > 8k permanent license. Codewarrior seems to be real touchy, it runs > > very slowly and it only works if I haven't launched any other > > applications otherwise it just about freezes up. So even though it > > doesn't say that it is Windows 95 compatable I tried installing it > on > > an older machine and the CD worked without a hitch. Yea. > > > > So here is the question. I was able to start a real simple project > > (turn on an LED) and it compiled and linked when I pressed the > Debug > > button, then it gave and error "CCSProtocolPlugin: CCS: Network > fault" > > > > Does anyone know what this error is from? > > > > Do I have to change any settings from the Default to get it to > > communicate with the Demo Board? > > > > Thanks in advance. |
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.
(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )
Re: MC56F8300DSK Problem - ev64bug - Nov 8 16:47:00 2003
|
Your suggestion was a good one I have somewhat of a resolution. First my XP machine doesn't like the Processor Expert it seems to hang up if I run any application before Code Warrior. So I tried setting up a new project with Simple C as the setting and then I went to debug. It still runs extremely slow. It didn't connect the first time but it got a lot further in that it tried to connect to the Demo Board. It worked on the second attempt. So I at least made contact, so I can proceed. Thanks for your help I will now step back into obscurity and not take up the user's group bandwidth..... ev64bug --- In , "Louis Loving" <louis.loving@c...> wrote: > Hello, > I am using DSP56858EVM and originally I also got the same error message. > I would keep trying and usually by the third or fourth try it would > start working. Once it started working, I wouldn't have any trouble > again for the rest of the day. The next morning, or any other time that > I rebooted, I would get the same message once again. > > -Louis > > -----Original Message----- > From: ev64bug [mailto:ev64bug@y...] > Sent: Monday, November 03, 2003 10:58 AM > To: > Subject: [motoroladsp] MC56F8300DSK Problem > Hi, > I'm new to this group. I just recieved the MC56F8300DSK Demo Kit. I > first had the fun of not being able to install the Codewarrior CD on > my XP machine, the install shield kept giving an error, so I > downloaded the file directly from Metrowerks and requested the free > 8k permanent license. Codewarrior seems to be real touchy, it runs > very slowly and it only works if I haven't launched any other > applications otherwise it just about freezes up. So even though it > doesn't say that it is Windows 95 compatable I tried installing it on > an older machine and the CD worked without a hitch. Yea. > > So here is the question. I was able to start a real simple project > (turn on an LED) and it compiled and linked when I pressed the Debug > button, then it gave and error "CCSProtocolPlugin: CCS: Network fault" > > Does anyone know what this error is from? > > Do I have to change any settings from the Default to get it to > communicate with the Demo Board? > > Thanks in advance. > > > Yahoo! Groups Sponsor > > ADVERTISEMENT <http://rd.yahoo.com/M=267637.4116719.5338353.1261774/D=egroupweb/S=1 705 > 771855:HM/A=1754451/R=0/SIG=11tpj98m3/*http://www.netflix.com/Default ?mq > so=60178323&partid=4116719> click here > > <http://us.adserver.yahoo.com/l? M=267637.4116719.5338353.1261774/D=egrou > pmail/S=:HM/A=1754451/rand=348716605> > > _____________________________________ > /groups.php3 > > . |
|
|
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.
(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )
Re: MC56F8300DSK Problem Resolved - ev64bug - Nov 12 6:27:00 2003
|
I filled out a bug report from Metrowerks website and I got a response back that led me to resolving the problem. CW uses the LM_LICENSE_FILE system variable but I had a previously installed program, Viewlogic, that also uses a user variable by that same name. Viewlogic requires a network license and the computer is not connected to the license server. So what I think was happening is that CW was looking for the license server basically hanging up. The solution was to remove the user variable for Viewlogic. So CW works blazingly fast and the Processor Expert is also functional. Regards, ev64bug --- In , "ev64bug" <ev64bug@y...> wrote: > Your suggestion was a good one I have somewhat of a resolution. > First my XP machine doesn't like the Processor Expert it seems to > hang up if I run any application before Code Warrior. So I tried > setting up a new project with Simple C as the setting and then I > went to debug. It still runs extremely slow. It didn't connect the > first time but it got a lot further in that it tried to connect to > the Demo Board. It worked on the second attempt. So I at least made > contact, so I can proceed. > Thanks for your help I will now step back into obscurity and not > take up the user's group bandwidth..... > > ev64bug > > --- In , "Louis Loving" > <louis.loving@c...> wrote: > > Hello, > > I am using DSP56858EVM and originally I also got the same error > message. > > I would keep trying and usually by the third or fourth try it would > > start working. Once it started working, I wouldn't have any > trouble > > again for the rest of the day. The next morning, or any other > time that > > I rebooted, I would get the same message once again. > > > > -Louis > > > > -----Original Message----- > > From: ev64bug [mailto:ev64bug@y...] > > Sent: Monday, November 03, 2003 10:58 AM > > To: > > Subject: [motoroladsp] MC56F8300DSK Problem > > > > > > Hi, > > I'm new to this group. I just recieved the MC56F8300DSK Demo Kit. > I > > first had the fun of not being able to install the Codewarrior CD > on > > my XP machine, the install shield kept giving an error, so I > > downloaded the file directly from Metrowerks and requested the > free > > 8k permanent license. Codewarrior seems to be real touchy, it runs > > very slowly and it only works if I haven't launched any other > > applications otherwise it just about freezes up. So even though it > > doesn't say that it is Windows 95 compatable I tried installing it > on > > an older machine and the CD worked without a hitch. Yea. > > > > So here is the question. I was able to start a real simple project > > (turn on an LED) and it compiled and linked when I pressed the > Debug > > button, then it gave and error "CCSProtocolPlugin: CCS: Network > fault" > > > > Does anyone know what this error is from? > > > > Do I have to change any settings from the Default to get it to > > communicate with the Demo Board? > > > > Thanks in advance. > > > > > > > > > > Yahoo! Groups Sponsor > > > > ADVERTISEMENT > > > > > <http://rd.yahoo.com/M=267637.4116719.5338353.1261774/D=egroupweb/S=1 > 705 > > > 771855:HM/A=1754451/R=0/SIG=11tpj98m3/*http://www.netflix.com/Default > ?mq > > so=60178323&partid=4116719> click here > > > > <http://us.adserver.yahoo.com/l? > M=267637.4116719.5338353.1261774/D=egrou > > pmail/S=:HM/A=1754451/rand=348716605> > > > > _____________________________________ > > /groups.php3 > > > > > > > . |
New Code Sharing Section now Live on DSPRelated.com. Learn about the Reward Program for Contributors here.
(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )