56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

Hello all, I'm using CW6.0 and generating S-record files for downloading. For some reason, the S7 portion of the file has the wrong address of the correct entry point. It is dividing the correct point by 2. To explain further, I know that my entry function is supposed to be at 0x0100. And, the resulting MAP file shows that my initial function is at 0x0100. However, the S7 portion of the S-file is showing 80 as the start point. I've gone through all of the setting within CW and don't see anything regarding this. Any ideas? Best Regards, Brad Laundry

(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )