56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

Hello group,

I use 56F8013 and CodeWarrior 56800/E  7.2    
Flashing is from Development environment.
I need to flash 56F8013 with ready .S files using
simple program like “flash_over_jtag.exe”. I have
downloaded it from Motorola. Following instructions i
have prepared .S records files in CodeWarrior. There
is only one problem - “flash_over_jtag.exe” was build
in 2003, so there are configuration files for 56F801,
56F803…, but no configuration file for 56F8013 - 
flash8013.cfg for example.
I will try to adapt some of them for 56F8013, but if
somebody could help ...
(56F8013 has unified Data/Program RAM and i'm affraid
that description in .cfg file will be little bit
strange)

Or if somebody has more experience, could propose me
better program/way for flash programming over JTAG for
production.

Thanks in advance,
    Gentcho
	

(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )