56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

hi,

i'm a beginner trying to program the motorola 56f8300demo board using codewarrior 7.0 for
freescale 56800/e hybrid controllers.
i'm trying to experiment with the demo example applications and i would like to print out the
values read back from the e-field sensor of the board.
i only found a way using log messages to achieve this. i put a log eventpoint after the command
that reads the e-field value. the problem is that the execution becomes very slow, probably
because the printing of the log messages halt the microcontroller. i also tried the data
visualization of codewarrior, but it is even slower. is there any other way to do this in a
more clever, faster way or this is the usual way to do it?

any help would be appreciated.

thanks in advance,
gabor

(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )