56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

Hi,

I=92m trying to program a DSP56F805 with flash_over_jtag that came with Cod=
eWarrior for 56800/E v7.3. For now, I=92m just trying the test program that=
=92s in the same folder.
Flash_over_jtag flash805.cfg test805.S

DSP56F800 Flash loader. Compiled on Jul 23 2003, 15:47:57.
version Epsilon 0.7
(c) Motorola 2001 - 2002, MCSL
Partial Copyright 2000-2002, Zloba Alexander
I/O port driver started
JTAG IR path length: 0
JTAG DR path length: 0 (BYPASS)
IDCode status: 0
Jtag ID: 0
Debug Request status: 0
Enable OnCE status: 0, polls left: 10
Enable OnCE status: 0, polls left: 9
Enable OnCE status: 0, polls left: 8
Enable OnCE status: 0, polls left: 7
Enable OnCE status: 0, polls left: 6
Enable OnCE status: 0, polls left: 5
Enable OnCE status: 0, polls left: 4
Enable OnCE status: 0, polls left: 3
Enable OnCE status: 0, polls left: 2
Enable OnCE status: 0, polls left: 1
Enable OnCE status: 0, polls left: 0
Target chip refused to enter Debug mode!
The target was reset, the application is running

I=92m using windows xp. When using CodeWarrior, I=92m able to program my bo=
ard using the same parallel command converter.

Can somebody know why the chip refuses to enter debug mode?a

Thanks for your help.

Bruno

=20

______________________________
New Year Gift for Members of DSPRelated.com.  Details here.

(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )