56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

Hi, I would like to interface a LCD with the Data bus an the Controler System. The LCD has an 8bit interface (data bus) and Pins for Enable (High for Access) Register Select (Data Register / Instruction Register) Read Write Direction (Low for Write from DSP to RAM/ High for Read from RAM) How can I interface these pins with the DSP in an easy way? Which Frequency is CLKO at the Data Bus? The LCD needs Puls width > 140 ns for Data Bus and the other pins. Thanks for help W.

(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )