56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

Thanks for the help. I have SDK version 2.4. I think I have to order 2.4.1. 1. Can we use fault and current sense inputs as normal input? 2. As far as I know we can use quadrature decoder inputs as normal inputs. 3. Can we use quad timer inputs as normal inputs? 4. Can we use use Can ports as normal IO Lets say Can tx as normal output and rx as input? 5. What are the possible pins that can be used as I/O ? (ofcourse not the GPI pins.) We plan to use DSP56F803 and 807 as microcontroller , so we need I/O. We can also use 56F826 which has more I/O but it lacks the features or 803 and 807. Best regards, HAN CICIMEN -----Original Message----- From: hancicimen [mailto:] Sent: Thursday, January 03, 2002 4:29 AM To: Subject: [motoroladsp] Can PWM output be used as Output? We plan use 56F803 and 807 in our applications. I just wonder if we can use PWM outputs as standart Output? Since the I/O is very limited with 56F803 we need more I/O. (For LCD, keypad, input and outputs etc.) As far as I understand Fault pins, current sense pins and Quadrature decoder pins can be used as ordinary input. Is it correct? Best regards, HAN _____________________________________ /groups.php3

______________________________
Start your Android Ice Cream Sandwich development on TI's AM35x Sitara ARM Cortex-A8 processor today.



(You need to be a member of motoroladsp -- send a blank email to motoroladsp-subscribe@yahoogroups.com )