Sign in
Search speechcoding
Subscribe to speechcoding
speechcoding by Keywords
ACELP | ADPCM | AMBE | AMR | AMR-NB | CELP | Codebook | DTMF | G.723 | G.726 | G.729 | GSM | Interpolation | LPC | LSF | LSP | MELP | PCM | Perceptual | Pitch | PSOL | QCELP | Quantization | SMV | VAD | Vocoder
Discussion Groups
Discussion Groups | Speech Coding | GSM EFR EXTRA MODULE IN ORDER TO DECODE???
Technical discussions related to Speech Coding (all itu and other vocoders, ACELP, CELP, AMR, etc)
GSM EFR EXTRA MODULE IN ORDER TO DECODE??? - JH WANG - Mar 31 4:25:00 2005
Hi All,
I am currently implementing the GSM EFR vocoders. There is one thing
that i don't really understand.
After encoding a file, i have to pass the file to another module so
that the output format of that module will will allow my decoder to
decode the file correctly. Why that module is not implemented on the
encoder itself??
The additional module is to include bfi to each of the frame of the
encoded file.
Urgent help needed. Thanks
JH WANG
(You need to be a member of speechcoding -- send a blank email to speechcoding-subscribe@yahoogroups.com )
Re: GSM EFR EXTRA MODULE IN ORDER TO DECODE??? - Phil Frisbie, Jr. - Apr 1 13:12:00 2005
JH WANG wrote: >
> Hi All,
>
> I am currently implementing the GSM EFR vocoders. There is one thing
> that i don't really understand.
>
> After encoding a file, i have to pass the file to another module so
> that the output format of that module will will allow my decoder to
> decode the file correctly. Why that module is not implemented on the
> encoder itself??
You must be using the reference code, right?
The output is modified to simulate communications loss and/or bit corruption.
Remember, GSM is designed for radio transmission so it must deal with loss or
corruption.
I converted the GSM HR to bit streams for Internet use, and it took MANY hours
to get it right!
> The additional module is to include bfi to each of the frame of the
> encoded file.
Yes, I think that is to help simulate a radio receiver if I remember correctly.
> Urgent help needed. Thanks
>
> JH WANG
--
Phil Frisbie, Jr.
Hawk Software
http://www.hawksoft.com
(You need to be a member of speechcoding -- send a blank email to speechcoding-subscribe@yahoogroups.com )
Re: GSM EFR EXTRA MODULE IN ORDER TO DECODE??? - pkon...@gmail.com - Apr 18 23:38:00 2005
hi wang,
For simulation purpose three files are given for EFR speech codec. One is coder, that compresses 160 samples to 244 bits. The intermediate module converts 244 bits to 247 bits and then it is given to decoder which converts back to 160 samples.
These 244 bits cannot be directly given to the decoder for the following reasons:-
1. Decoder should know whether the frame what it is decoding is a good one or a bad one so that the processing can be changed accordingly.. This is indicated by BFI flag
2. Decoder should know whether the frame that it is decoding is a SID frame or normal speech frame.. This is indicated by SID flag
3. Similarly decoder should have knowledge of Time alignment and this is indicated by TAF flag.
These flags are calculated in the intermediate module and given to the decoder and it decodes properly. This is used in TRAU of GSM wireless technology. In the actual implementation, the intermediate module is implemented in the BTS on the Uplink side and the flags that are generated are passed through abis framing/deframing to TRAU where decoder alone is implemented. Decoder gets the 244 bits and also these flags and proper decoding takes place.
I hope i cleared your doubt
regards
parthu
(You need to be a member of speechcoding -- send a blank email to speechcoding-subscribe@yahoogroups.com )