Try changing the compiler options to "far-data" (I think that it what it is). This problem usually occurs when a project uses "near" data and the linker places the data outside the "near" data addressable range. Have a read about "near" data stuff in the compiler manual. At 10:18 PM 5/7/2004 -0700, Zulfiqar Khan wrote: >Can any one help me in removing the problem >"relocation value truncated at 0x10 in section .bios >file" , when i try to declare array of structure >pointer globally .(array size = 4900; structure size = >20 bytes) >When i make the a/m dclaration in the main function >the problem do not appear >Thaanks > >Zulfiqar > > >__________________________________ > > >_____________________________________ >Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > >_____________________________________ >About this discussion group: > >To Join: > >To Post: > >To Leave: > >Archives: http://www.yahoogroups.com/group/code-comp > >More Groups: http://www.dsprelated.com > >Yahoo! Groups Links > > |