Adaptive Filter | ADPCM | ADSP | ADSP-2181 | Aliasing | AMR | Anti-Aliasing | ARMA | Autocorrelation | AutoCovariance | Beamforming | Bessel | Blackfin | Butterworth | C6713 | CCS | Chebyshev | CIC Filter | Circular Convolution | Code Composer Studio | Comb Filter | Compression | Convolution | Cross Correlation | DCT | Decimation | Deconvolution | Demodulation | DM642 | DSP Boards | DSP/BIOS | DTMF | Echo Cancellation | Equalization | Equalizer | ETSI | EZLITE (Ez-kit Lite) | FFT | FFTW | FIR Filter | Fixed Point | FSK | G.711 | G.723 | G.729 | Gaussian Noise | Goertzel | GPIO | Hilbert Transform | IFFT | IIR Filter | Interpolation | Invariance | JTAG | Kalman | Laplace Transform | Levinson | LPC | McBSP | MIPS | Modulation | MPEG | Multirate | Notch Filter | Nyquist | OFDM | Oversampling | Pink Noise | Pitch | PLL | Polyphase | QAM | QDMA | Quantization | Quantizer | Radar | Random Noise | Reed Solomon | Remez | Resampling | RTDX | Sampling | Sharc | TI C6711 | Undersampling | Viterbi | Wavelets | White Noise | Wiener Filter | Windowing | XDS510PP | Z Transform

Hi,

I was working with CCS 3.3.38 for my video decoder development on DM6446
using simulator. As I was facing some issues in using ACPY3 for one of my
DMA transfers, I had upgraded my CCS 3.3.38 to 3.3.79 with CCS Service
Release 9 from TI website.

Now after updating to this version (3.3.79), my decoder is not working
for
any kind of DMA trasfers using ACPY3. The decoder hangs in ACPY3_Wait
even
for the cases which CCS 3.3.38 was able to pass.

Let me know if i need to use new versions of Code generation tools/DSP
BIOS
or new ACPY3/DMAN3 libs to resolve this issue?

Regards,
Padma

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.