Adaptive Filter | ADPCM | ADSP | ADSP-2181 | Aliasing | AMR | Anti-Aliasing | ARMA | Autocorrelation | AutoCovariance | Beamforming | Bessel | Blackfin | Butterworth | C6713 | CCS | Chebyshev | CIC Filter | Circular Convolution | Code Composer Studio | Comb Filter | Compression | Convolution | Cross Correlation | DCT | Decimation | Deconvolution | Demodulation | DM642 | DSP Boards | DSP/BIOS | DTMF | Echo Cancellation | Equalization | Equalizer | ETSI | EZLITE (Ez-kit Lite) | FFT | FFTW | FIR Filter | Fixed Point | FSK | G.711 | G.723 | G.729 | Gaussian Noise | Goertzel | GPIO | Hilbert Transform | IFFT | IIR Filter | Interpolation | Invariance | JTAG | Kalman | Laplace Transform | Levinson | LPC | McBSP | MIPS | Modulation | MPEG | Multirate | Notch Filter | Nyquist | OFDM | Oversampling | Pink Noise | Pitch | PLL | Polyphase | QAM | QDMA | Quantization | Quantizer | Radar | Random Noise | Reed Solomon | Remez | Resampling | RTDX | Sampling | Sharc | TI C6711 | Undersampling | Viterbi | Wavelets | White Noise | Wiener Filter | Windowing | XDS510PP | Z Transform

Hey Rick,

Thanks for clarifying where she's coming from (processing
data already sampled).

r...@_BOGUS_ieee.org (Rick Lyons) writes:
> [...]
>     "so all I know is that it 
>      was recorded, filtered at 5kHz and 
>      digitized at 10-20 kHz using a Digidata 
>      1200 A/D board. The data has been 
>      downsampled to 2000Hz."
>
> That's sounds like lowpass analog filtering 
> with a cutoff freq of 5 kHz.  I wonder how sharp 
> are the filter's skirts.  Then the "digitized at 
> 10-20 kHz" phrase was also kinda "scary" because the 
> sample rate needs to be well-known and fixed  
> for FFT results to have meaning in terms of 
> spectral components' frequencies.  

I agree - we don't know what her sampled data situation
REALLY is.

> I didn't 
> know what her phrase "downsampled to 2000Hz" meant.
> Wonder if that meant some sort of frequency 
> translation, or could it have meant, "decimated 
> to a sample rate of 2000 Hz"?

My first reaction is just that it was decimated - I
don't know if she meant the sample rate came down
to 2000 Hz or the data bandwidth.

> Her problem sure sounds interesting and one that 
> can be solved.  I'll bet this is a university 
> research project.  If she's in North Carolina 
> Randy, you could pay her a visit.  If she's in Northern
> California, I could stop by and look at her test 
> hardware.  Sure sounds like any interesting project 
> to me.

You could probably get 10 usenet posts ahead if you
could just talk to her interactively (i.e., on the phone).

She could be at UNC/Chapel Hill since they have a biomedical
engineering program and lots of medical stuff going on there
(not to mention Duke). Of course she could be in Berkina Fasa, too.
-- 
%  Randy Yates                  % "Though you ride on the wheels of tomorrow,
%% Fuquay-Varina, NC            %  you still wander the fields of your
%%% 919-577-9882                %  sorrow."
%%%% <y...@ieee.org>           % '21st Century Man', *Time*, ELO
http://home.earthlink.net/~yatescr

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

Maria wrote:
> Hi,
> 
> I am using Matlab to do ffts for some data collected in the lab of
> electrophysiology recordings.  When I plot the power spectrums, I get
> huge peaks from 0-1 Hz.  Are these peaks representative of the data or
> artifacts carried over/created from the fft?
> 
> Any help would be appreciated.
> 
> Thanks.


Based on various posts in this thread I suggest a literature search for

Dr. Edgar Gasteiger
Veterinary Physiology
Cornell University
circa late 1960's

I worked for him and Dr. Nangeroni as a student electronics tech.
The problem description brings back vague memories but too few useful 
details.

I've initiated personal contacts. If anything comes up, I will post.

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

> Maria wrote:
>> Hi,
>> 
>> I am using Matlab to do ffts for some data collected in the lab of
>> electrophysiology recordings.  When I plot the power spectrums, I get
>> huge peaks from 0-1 Hz.  Are these peaks representative of the data or
>> artifacts carried over/created from the fft?
>> 
>> Any help would be appreciated.
>> 
>> Thanks.

Perhaps they are DC offsets?

-- 
Toby
asktoby.com
BSOD VST & ME

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

"Toby Newman" <g...@asktoby.com> wrote in message
news:Xns94C5846EA980Fgoogleasktobycom@127.0.0.1...
> > Maria wrote:
> >> Hi,
> >>
> >> I am using Matlab to do ffts for some data collected in the lab of
> >> electrophysiology recordings.  When I plot the power spectrums, I get
> >> huge peaks from 0-1 Hz.  Are these peaks representative of the data or
> >> artifacts carried over/created from the fft?
> >>
> >> Any help would be appreciated.
> >>
> >> Thanks.
>
> Perhaps they are DC offsets?

Toby,

At the first spectral sample could be....  But not at any other spectral
samples unless there's a window that will spread the spectrum of the dc
component.

Fred

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.