Adaptive Filter | ADPCM | ADSP | ADSP-2181 | Aliasing | AMR | Anti-Aliasing | ARMA | Autocorrelation | AutoCovariance | Beamforming | Bessel | Blackfin | Butterworth | C6713 | CCS | Chebyshev | CIC Filter | Circular Convolution | Code Composer Studio | Comb Filter | Compression | Convolution | Cross Correlation | DCT | Decimation | Deconvolution | Demodulation | DM642 | DSP Boards | DSP/BIOS | DTMF | Echo Cancellation | Equalization | Equalizer | ETSI | EZLITE (Ez-kit Lite) | FFT | FFTW | FIR Filter | Fixed Point | FSK | G.711 | G.723 | G.729 | Gaussian Noise | Goertzel | GPIO | Hilbert Transform | IFFT | IIR Filter | Interpolation | Invariance | JTAG | Kalman | Laplace Transform | Levinson | LPC | McBSP | MIPS | Modulation | MPEG | Multirate | Notch Filter | Nyquist | OFDM | Oversampling | Pink Noise | Pitch | PLL | Polyphase | QAM | QDMA | Quantization | Quantizer | Radar | Random Noise | Reed Solomon | Remez | Resampling | RTDX | Sampling | Sharc | TI C6711 | Undersampling | Viterbi | Wavelets | White Noise | Wiener Filter | Windowing | XDS510PP | Z Transform

Which one, XDS510 class, possibly cheap emulator for 5502 DSP would you 
suggest?

I nearly decided to buy Spectrum Digital XDS510PP Plus for 1300$. But 
after I downloaded the latest drivers from Spectrum Digital website, I 
realised, that there is no specific 5502 *.ccs file to be imported into 
Code Composer Studio. Can I still use this emulator for my design with 
5502 processor? Their support didn't respond though they claim they will 
respond within 4 working hours.

The other emulator I was considering is TDS510 USB2.0 emulator, the 
price I found on TI website is 950$, and on TI website 5502 is 
explicitly listed as supported processor (usually only family is listed, 
e.g. C55x or something similar). Can someone confirm it? Maybe any other 
suggestions?

-- 
Robert Pudlik

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.

>I nearly decided to buy Spectrum Digital XDS510PP Plus for 1300$. But 
>after I downloaded the latest drivers from Spectrum Digital website, I 
>realised, that there is no specific 5502 *.ccs file to be imported into 
>Code Composer Studio. Can I still use this emulator for my design with 
>5502 processor? Their support didn't respond though they claim they will

>respond within 4 working hours.
>

We are currently using an XDS510USB on a 5502 with "almost" no problem.

However, I had to go back to CCS 2.21 because apparently it didn't work
with CCS 3.1 on our PC.
Furthermore, I had to download updated drivers from spectrum digital
website, because with the ones included in the box, the USB enumeration
phase never ended.

Now the system seems stable enough.

Apt


		
This message was sent using the Comp.DSP web interface on
www.DSPRelated.com

______________________________
New DSP Code Snippets Section now Live.   Learn more about the reward program for contributors here.